Contents
Recommended products in the "Thermaltake Cases" section
We have products in the range "Thermaltake Case" compared with each other and put together recommendations for you. Here you will find the top 15 in the "Thermaltake housing" section.
Thermaltake housing – the most important things at a glance
The first thing to consider when looking for a suitable case for your computer is size. With a MidiTower you are on the safe side, as these usually complete most mainboards. MicroATX cases are a bit smaller, for MiniITX or NanoITX mainboards you have to choose an SFF case (Small Form Factor). The term "tower" already says in which form the housing is usually offered. In addition to the classic tower variant, there are also desktop cases that are flatter and usually have a side slot for hanging in the hard drive(s).
With midi towers, you should definitely make sure that the desired model can accommodate the desired mainboard size. Especially with MicroATX and MiniITX, this should definitely be checked, since different versions are offered here. Also pay attention to the maximum size of the components to be installed. A MidiTower can accommodate an ATX mainboard, but the heat sinks of the CPU and the graphics chip can only rarely be built higher. If necessary, a different housing should definitely be selected here.
Most manufacturers offer their cases in different versions. For example, there are "normal" tower housings, which are mostly made of plastic and steel and are simply intended to house the necessary components. In addition, there are also special gaming cases, which often have unique designs and features and thus represent a real enrichment for the gaming setup. In addition, there are of course numerous other housing variants that differ mainly in terms of design and equipment.
Thermaltake is a well-known computer case and cooling system company. The company offers both plastic housings and aluminum housings. Furthermore, the cases from Thermaltake differ in size, design and equipment. For example, there is the "Armor A60" model, which impresses as a plastic case with a steel construction, and the "X9 Black Edition" model, which has a very modern design and, with its size of 50cm x 54cm x23cm, can also accommodate larger mainboards without any problems .
The cases from Thermaltake can therefore be quite different. Basically, however, the cases from Thermaltake are usually well made and have many useful features. So are most models with
The bestsellers in the field of "Thermaltake cases"
A list of the best sellers under the category "Thermaltake Case" you can find here. Here you can find out which products other users have bought particularly often.
- ✔️In collaboration with Watermod France, the Tower 900 reflects the passion to create a new angle in case design. Inspired by the concept of vertical mounting surrounded by durable tempered glass, the Tower 900 expands our vision to create a new era in ESPORTS modding culture worldwide
- ✔️The large 5mm thick tempered glass panels protect while presenting all the components of the case. The Tower 900 is the perfect balance between functionality and aesthetics
- ✔️Supports motherboards up to standard E-ATX, tower CPU coolers with a maximum height of 260mm and multi-GPU configurations that can be mounted vertically and are up to 400mm long. The modular "1+6+2" drive bay design allows for easy installation of up to one 5,25", six 2,5"/3,5" (with HDD cage) and two 2,5" (with hard drive slot)
- ✔️The Tower 900 allows the user to build the system from the ground up with predetermined modular panels, racks, brackets and pre-engineered mounting assemblies. No more inaccessible corners or gaps - Simplified on-the-fly installation made possible by the demountable modular design
- ✔️By supporting up to two 560mm DIY liquid coolers or one 360mm AIO liquid cooler, the cooling options become really interesting. The right and left sides of the case are designed with different mounting points for radiators to ensure proper space and placement when building DIY/AIO configurations
- ✔️Mainboard: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX),
- ✔️The Core P8 TG can be converted into an open-frame case by simply removing the front and top panels
- ✔️The Core P8 TG is equipped with three 4mm tempered glass panels. The large side window allows a perfect view of the illuminated RGB components
- ✔️Three super fine magnetic dust filters on the right side, top and bottom provide excellent protection against dust and dirt and can be easily removed for cleaning
- ✔️With the idea and the 3D printing options, Thermaltake designs a panorama case in the style of the open-frame series to ensure direct access to the components. This process can be used to create a system for mods with water cooling components. The files can be downloaded and printed for 3D printing on the 3DMakers microsite
- ✔️Disassemble your case down to the scaffolding with our modular design and install elements when and how you need them. The Core P6 TG Snow features modular panels, racks, brackets and pre-configured mounting arrangements. No more unreachable screw corners or gaps, installation can be a breeze with our knock-down modular design
- ✔️Mainboard: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX), 12” x 13” (E-ATX)
- piano mirror coating
- Dual USB 2.0, IEEE1394 Firewire HD audio ports
- Front panel mesh design for maximum ventilation
- Simple, flat and clean designs with versatility
- A fully modular case where all components can be removed from the case for easier installation
- High-Efficiency Ventilation: 9cm silent fan at the front and 6cm dual fan at the rear
- Supports Micro ATX form factor & Mini ITX form factor
- Support ATX PS2 power supply
- Color: Black
- Package Dimensions (L x W x H): 25.2 x 17.32 x 15.08 inches
- Package Weight: 42.5 pounds
- Country of origin: - China
- Designed for gamers, perforated metal mesh front and top panel for fast heat dissipation and fast air intake for maximum ventilation. The raised feet on the bottom improve air circulation
- Tool-free installation
- The perforated front panel features data transfer with SuperSpeed USB 3.0 port and a standard USB 2.0 port, an HD microphone and headset jacks to allow large direct access when needed
- Optimized ventilation
- Pre-mounted holes to support motherboards up to standard ATX and CPU cooler installation, long graphics card is also supported as well as advanced cable management and liquid cooling system
- [9 Pre-installed 120mm ARGB Fans] - Suitable for improved cooling. With the pre-installed ARGB controller, you can sync it to the motherboard, each addressable ARGB fan offers 16,8 million colors for exceptionally customizable lighting.
- [2 Tempered Glass] -- The C590 gaming case is equipped with 2*4mm thick tempered glass, which can clearly see RGB lighting and building components, creating a good gaming atmosphere.
- [I/O Panel] - 2 USB 3.0 ports, 1 USB 2.0 port, 1 HD Audio, Power button.
- [Cable Management] - Bays on the back: 3 x 3,5" HDD and 3 x 2,5" SSD. Detachable cable storage box; Reasonable rear guide hole designed.
- [Notable Extension] - C590 mid tower gaming computer chassis supports ATX/Micro-ATX/Mini-ITX motherboards.
- With a total of 30 addressable LEDs (front: 12; middle: 6; rear: 12) with large light coverage in uniform color and brightness, the integrated LED ring can illuminate your case with 16,8 million colors.
- Set Up Your Spectacular Lighting
- Digital lighting control
- PWM controlled fan with 9 fan blades
- Hydraulic bearing with low noise design
- ✔️The Tower 100 is a vertically designed case constructed entirely of solid steel. The vertical design allows for a smaller cabinet footprint and helps minimize clutter to your play and work space
- ✔️The Tower 4's three 100mm tempered glass windows are thicker and more scratch resistant when compared to standard acrylic
- ✔️The Tower 100 has well-designed magnetic filters on the two inner sides and bottom. The removable filters offer excellent dust protection and thus ensure a dust-free environment.
- ✔️Supports a CPU cooler with a maximum height of 190mm, VGA with a maximum length of 330mm, a power supply with a length of up to 180mm, two 2,5" side mount SSDs and two 2,5". -inch or two 3,5 inch hard drives at the back (without rear fan)
- ✔️There are two 3.0 USB and one USB 3.1 (Gen 2) Type-C ports on the top for direct access when needed.
- ✔️Mainboard: 6.7” x 6.7” (Mini ITX)
- STEEL FRONT AND FRGB LIGHTING: The front of the MC-X2 gaming case is characterized by an imposing steel front and spectacular FRGB lighting of the two fans supplied
- ADVANCED COOLING: The MC-X2 case eliminates all temperature problems while remaining silent thanks to a constant airflow that can offer up to 4 120mm fans (2 pre-installed) and liquid cooling support up to 240mm
- SIDE WINDOWS: The MC-X2 gaming tower features a full side window that allows you to showcase your PC in all its glory
- LARGE CAPACITY The MC-X2 PC case offers support for ATX, microATX and mini-ITX motherboards, liquid cooling support up to 240mm, 3 graphics fans up to 317mm, 3 x 2,5" SSD and 2 x 3,5" HDD drives and efficient internal cable management
This is what Stiftung Warentest says about products in the "Thermaltake housing" area
Stiftung Warentest examines, compares and tests the best products for consumers. Many of the tests by Stiftung Warentest help in deciding which product to buy. We do not currently know whether there is a test winner from Stiftung Warentest for this product that is recommended for purchase.
Our comparison winner in the "Thermaltake housing" area
- ✔️In collaboration with Watermod France, the Tower 900 reflects the passion to create a new angle in case design. Inspired by the concept of vertical mounting surrounded by durable tempered glass, the Tower 900 expands our vision to create a new era in ESPORTS modding culture worldwide
- ✔️The large 5mm thick tempered glass panels protect while presenting all the components of the case. The Tower 900 is the perfect balance between functionality and aesthetics
- ✔️Supports motherboards up to standard E-ATX, tower CPU coolers with a maximum height of 260mm and multi-GPU configurations that can be mounted vertically and are up to 400mm long. The modular "1+6+2" drive bay design allows for easy installation of up to one 5,25", six 2,5"/3,5" (with HDD cage) and two 2,5" (with hard drive slot)
- ✔️The Tower 900 allows the user to build the system from the ground up with predetermined modular panels, racks, brackets and pre-engineered mounting assemblies. No more inaccessible corners or gaps - Simplified on-the-fly installation made possible by the demountable modular design
- ✔️By supporting up to two 560mm DIY liquid coolers or one 360mm AIO liquid cooler, the cooling options become really interesting. The right and left sides of the case are designed with different mounting points for radiators to ensure proper space and placement when building DIY/AIO configurations
- ✔️Mainboard: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX),
Current offers in the area "Thermaltake housing"
You want the best products in the range "Thermaltake Case" buy? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the "Thermaltake housing" category.