1. Guides
  2. »
  3. product guide
  4. »
  5. Accessories
  6. »
  7. PC case with fan – The 15 best products in comparison

PC case with fan – The 15 best products in comparison

Comparative winner of the editors EMPIRE GAMING - Diamond PC case gamer ARGB medium-sized case tower ATX - facade made of diamond plexiglass and side door made of safety glass - 4 fans 5 volts LED RGB addressable 120 mm

PC case with fan – The 15 best products in comparison

Recommended products in the "PC case with fan" section

We have products in the range "PC case with fan" compared with each other and put together recommendations for you. Here you will find the top 15 in the “PC case with fan” section.

PC case with fan – the most important things at a glance

There is a wide range of different types of cases with fans on the computer market. However, most people do not know which is the best choice for them. In this article, we will examine some of the key points to consider when purchasing a PC case with a fan.

First of all, you need to decide what type of fan you need. The two main types are axial and centrifugal fans. Axial fans are the most commonly used fans in PC cases. They are very efficient and have low drag. Centrifugal fans are slightly larger than axial fans and have greater airflow. However, they are also a little louder.

Another important point to consider when purchasing a PC case is size. Most cases are either ATX compatible or microATX compatible. However, most mATX motherboards will work in an ATX case. If you want a smaller case, you should go for a microATX case.

The next question to ask yourself is what type of fan you need. Centrifugal fans are typically noisier than axial fans. However, they are more efficient when it comes to increasing airflow. Axial fans are quieter, but have a lower air flow rate.

The final question to ask yourself is whether you want to buy a case with a fan installed or one without a fan. Pre-installed fans tend to be more expensive, but they make installation easier. However, if you don't need a fan, you can save money by purchasing a fanless case.

The bestsellers in the field of "PC cases with fans"

A list of the best sellers under the category "PC case with fan" you can find here. Here you can find out which products other users have bought particularly often.

Bestseller no. 1
DS Rainbow LED Strip LED Strips Computer Lighting Magnet Light Bar Molex Connector 2 Pcs LED Strip for PC Case Lighting Kit (30cm)
  • Magnetic design: These LED strips are firmly connected to the PC case via the magnets inside and are only suitable for the iron surface
  • Plug and play design LED strips with Molex connection
  • LED strip length: 50CM (with 20CM cable)
  • Almost compatible with all PC case models
  • Good Quality and Super Brightness: Computer case light is super brighter than the normal led strips to bring the best lighting effect for your PC
Bestseller no. 2
ANGEEK 2 pieces 27cm computer fan cable PWM adapter 1 to 2 converter 3-pin/4-pin PC power cable fan extension cable black
  • The wires are 27cm long, braided black and have a 4 pin female connector on one end and 2 male connectors on the other end.
  • The extension cord is encased in a black mesh for extra protection and good looks on the cord.
  • This further extends the life of the cable. The ends to the connectors are held in place with heat shrink tubing for a clean finish.
  • These extension cables give you more choices as to where to position PWM or fans in your case.
  • The fan splitter cable provides an additional fan to increase airflow in your computer case and reduce heat build-up in the case.
Bestseller no. 3
KKSB Odroid XU4Q Case Aluminum | SBC | snap button | Fan | black-and-white
  • PREMIUM HOUSING: Exclusively for the Odroid XU4Q, our cooling experts in Sweden have developed the cooling housing, which is made of aluminum. It's a two-piece case that's easy to assemble. With a modern black and white combination, our case ensures stunning aesthetics.
  • EFFICIENT COOLING: When developing the Odroid XU4Q case, special emphasis was placed on optimal cooling efficiency and compatibility. The case body acts as an effective heat sink and, in combination with the built-in fan, perfectly protects your single-board computer from thermal problems in difficult temperature environments or when the CPU is overclocked.
  • 100% COMPATIBILITY: All connections of the Odroid XU4Q are freely accessible and can be reached without any problems. In addition, the corresponding button on the board can be operated via the push button on the top.
  • VERY EASY TO ASSEMBLE: Thanks to the snap-on assembly of the lid and base, assembly is very easy. 4 non-slip rubber feet ensure a secure grip on any surface. 2 mounting holes can be used to attach the housing to the wall or other surface.
  • SCOPE OF DELIVERY & SUPPORT: You will receive an Odroid XU4Q case black/white. If you have any questions or need help, our KKSB team is always at your side. Just write to us through the Amazon messaging system and one of our staff will be there for you personally.
Bestseller no. 4
Acrylic Case Raspberry Pi 4B with Low Noise and High Power Fan Transparent Shell Accessory Set
  • 【Acrylic Protective Case】The acrylic case is specially designed for Raspberry Pi 4B to ensure effective protection.
  • 【Effective Heat Dissipation】The fan can effectively lower the temperature of Raspberry Pi.
  • 【Special Screws】Comes with a set of screws, which is best for installing Raspberry Pi fans.
  • 【Low Noise & High Performance】The upgraded bearing of the fan not only can emit a lot of wind, but also quiet enough.
  • 【Complete DIY Tools】Complete tools that you can operate yourself, suitable for DIY enthusiasts.
Bestseller no. 5
Acrylic Case Kit for Raspberry Pi 4B, 9-Layer High Quality Clear Acrylic Mounting Case Kit with Cooling Fan and Power Cover for Raspberry Pi 4B(Case Kit)
  • 【Convenient Case Kit】 It is very convenient. Don't worry about blocking WiFi and Bluetooth signals.
  • 【Support Fan】Support fan installation without worrying about overheating.
  • 【Specially Designed】The case is very suitable for Raspberry Pi 4B and all interfaces are reserved.
  • 【High Quality Acrylic】The shell is made of high quality acrylic, which is strong and durable.
  • 【9-Layer Elaborate Design】9-Layer Elaborate Design with Screws and Screw Nuts for More Convenient Use.
Bestseller no. 6
Silverstone SST-PF120-ARGB - PermaFrost premium water cooler with adjustable 120mm PWM, ARGB, Intel/AMD
  • Integrated addressable RGB lighting for water block and fan
  • Rubber pads on fan for less vibration and noise
  • Featuring an addressable RGB controller with 10 light modes and the ability to adjust brightness and color changing speed.
  • Compatible with Intel Socket LGA775/115X/1200/1366/2011/2066 and AMD Socket AM2/AM3/AM4/FM1/FM2
Bestseller no. 7
upHere 120pcs 5mm PC Case Ultra Quiet PC Fan (NK12BK3-5)
  • 1. The balanced design of airflow and air pressure maximizes heat reduction to keep your system cool and running smoothly.
  • 2. Improved fan frame: improved frame structure, reduces turbulent flow noise, increases efficiency.
  • 3. The 120mm fan blade is designed for quiet operation without sacrificing performance.
  • 4.9 Fan Blade Design - Provides balanced airflow and static pressure, optimized cooling performance, perfect compatibility with case or cooler applications.
  • 5. High airflow: 120mm fan for high airflow and great cooling.
Bestseller no. 8
anidees AI Aureola V2 120mm 3er RGB PWM fan compatible with addressable 5V 3pin RGB header from Asus, Gigabyte, MSI, for case fans, cooling fans, with remote control (AI-Aureola-V2)
  • 120mm dual ring RGB fans x 3pcs: 18/6 independent RGB LEDs in each fan, divided into two separate light loops, rainbow and static colors.
  • High Thermal Efficiency: High airflow and large volume cooling by blade design; Super Quiet: Equipped with rubber pads and gun mounts that ensure silent operation.
  • Easy to Use: With the Fan Hub, you can control the fan speed and LED mode by remote control or connect to motherboard, control the fan speed by PWM and the 5V 3pin ASUS Aura Sync ARGB, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion (Please note: 12V 4-pin RGB headers are not supported by the motherboard).
  • PWM Fan Control: Allows dynamic speed adjustment to minimize noise or maximize airflow.
  • RF Wireless Control: Allows you to adjust fan speed (S/M/H) and cycle through lighting effects/brightness/LED speed without opening the case.

This is what Stiftung Warentest says about products in the “PC case with fan” area

Stiftung Warentest examines, compares and tests the best products for consumers. Many of the tests by Stiftung Warentest help in deciding which product to buy. We do not currently know whether there is a test winner from Stiftung Warentest for this product that is recommended for purchase.

Our comparison winner in the field of "PC case with fan"

Compare winner
DS Rainbow LED Strip LED Strips Computer Lighting Magnet Light Bar Molex Connector 2 Pcs LED Strip for PC Case Lighting Kit (30cm)
  • Magnetic design: These LED strips are firmly connected to the PC case via the magnets inside and are only suitable for the iron surface
  • Plug and play design LED strips with Molex connection
  • LED strip length: 50CM (with 20CM cable)
  • Almost compatible with all PC case models
  • Good Quality and Super Brightness: Computer case light is super brighter than the normal led strips to bring the best lighting effect for your PC

Current offers in the area "PC case with fan"

You want the best products in the range "PC case with fan" buy? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the "PC case with fan" category.

No products found.

Related Articles