1. Guides
  2. »
  3. product guide
  4. »
  5. Accessories
  6. »
  7. Card reader ID – The 15 best products in comparison

Card reader ID – The 15 best products in comparison

Card reader ID – The 15 best products in comparison

Recommended products in the "ID Card Reader" section

We have products in the range "Card reader ID" compared with each other and put together recommendations for you. Here you will find the top 15 in the "ID card reader" section.

Card reader ID card – the most important things at a glance

A card reader, also known as a reader or card reader, is an electronic device used to read electronic ID cards and other identification cards. Most readers read the data on the card by performing a so-called contactless reading. Contactless reading allows the reader to read the data on the card without making direct contact with the card. Contactless readers are typically wireless and battery powered.

Card readers are used in a variety of applications including banks, government agencies and businesses. Some card readers can only read a single type of identification card, while other devices are capable of reading multiple types of cards. Card readers specially designed for this purpose are usually used to read ID cards.

Most card readers use RFID (Radio Frequency Identification) technology to read data from RFID chips on the card. RFID is a wireless technology used to send and receive data over short distances. RFID chips are small transponderembedded in a variety of products, including ID cards. RFID chips contain a unique identifier that allows a reader to identify the card and read the data stored on the card.

Most RFID card readers are compatible with the most common RFID standards, including ISO 14443 and ISO 15693. ISO 14443 is the international standard for RFID-based contactless ID cards. ISO 15693 is the international standard for RFID-based contactless cards. Card readers that are compatible with ISO 14443 can usually also handle ISO 15693 compatible cards.

Card reader prices vary by manufacturer and model. Most devices cost between 100 and 200 euros. Some manufacturers also offer discounts for purchasing multiple readers.

Card readers can be purchased online or in specialty stores. When purchasing a reader, you should make sure that the device accepts the cards you intend to use. Some devices only accept certain types of cards, while other devices are capable of reading multiple types of cards.

When you buy a card reader, you should make sure that the device complies with the privacy policies you intend to follow. Card readers usually save those stored on the card Dat

The bestsellers in the field of “ID card readers”

A list of the best sellers under the category "Card reader ID" you can find here. Here you can find out which products other users have bought particularly often.

Bestseller no. 1
JETOP card holder ID card, 2 extendable ID card holders, 2 hard plastic ID card holders, 2 soft ID card holders, transparent hard plastic card holder with thumb slot for card holders, key cards
  • [Two Ways to Use]: Unlike traditional ID card holders, the hard plastic ID card holder can be used both horizontally and vertically. The perforation on both sides is convenient and prevents your ID or work card from being scratched, bent or torn.
  • [Thoughtful Design]: The hard plastic ID card holder has a thumb slot to slide out the card easily and can hold 1-2 cards. The soft badge case then has a seal over it which is completely waterproof and drop proof.
  • [Durable Material]: The hard plastic ID card holder is made of hard PC with a thickness of 2mm, which is not easily deformed or broken; The Soft ID Card Case is made of high-strength PC plastic, which is soft and durable.
  • [You will receive]: 2 pieces of hard plastic ID card holder with the external dimensions 9,7*6,5 cm and a card slot for cards: 8,8*5,5 cm; 2 pieces of soft ID card cover with the external dimensions 9,7*8 cm and a card slot for cards: 9,3*6 cm; 2 Extendable badge holders that extend to 68 cm.
  • [Wide Applications]: The ID card holder is suitable for ID cards, membership cards, children's bus cards, driver's license cards, school ID cards, etc. Ideal for hospital staff, nurses, police and students.
Bestseller no. 2
REINER SCT cyberJack RFID chip card reader basis | For the new ID card (nPA) Black
  • The perfect entry-level model: The cyberJack serves as electronic proof of identity and was designed with the new ID card in mind. The nPA can thus be used as an ID on the Internet
Bestseller no. 3
Karteo ID card case with lanyard [1 piece] Card holder Card case vertical made of soft plastic with Euro perforation and lanyard black for ID cards
  • ID HOLDER WITH LANYARD: suitable for company ID cards, name tags, ID cards, subscription cards and many other plastic cards
  • STABLE AND ROBUST: Lanyard 16 mm polyester black with metal carabiner and card holder made of polyvinyl Soft plastic cards can be easily presented at access control and worn visibly
  • SIMPLE AND CONVENIENT: Admission tickets and access cards can easily be shown at the access control and worn visibly
  • PRODUCT DIMENSIONS: Cover vertical alignment for cards in debit card format (86 x 54 mm); Band 16 mm wide and 45 cm long
  • MANY POSSIBILITIES OF USE: for trade fairs, events, festivals, celebrations, conferences, company events, meetings, parties, events and much more.
Bestseller no. 4
ID card cover JoJo with tear-resistant cord for vaccination card and ID card from BE-HOLD offers a secure hold and easy removal of 2 cards through the two transparent sliders
  • Complete ID card set: Your ID cards are now always ready to hand with the BE-HOLD ID card set, consisting of an ID card case and JoJo cards – there is no need to search for them, which saves a lot of time and trouble
  • Patented badge holder for up to 2 badges that can be removed easily thanks to the card slide
  • JoJo with SAFTEY CORD a tear-resistant cord - can be pulled out to approx. 80 cm and easily reaches every reader
  • Thanks to the clip and clamp, the JoJo can be safely and easily attached to clothing anywhere - both variants are gentle on your clothing - neither belts nor pants are worn away
  • Order now completely worry-free - BE-HOLD offers you a 365-DAY GUARANTEE - that means, should you ever have a problem with your badge holder or card yo-yo for whatever reason, we will replace it for you and give you a new one immediately Send set. Just give us a call or email
Bestseller no. 5
ID card holder with ribbon, 3 pieces ID card yo-yo, ID card yo-yo with pull-out ID card holder, ID card holder with clip and tear-resistant cord, key chain strap for company ID card or bus tickets
  • ID card holders always at hand - included in delivery are a set of 3 ID card holders plus a very sturdy yo-yo strap with a carabiner hook. This means you can overcome any hurdle in style and practicality, as you always carry your company pass badge holder or key chain with you!
  • The carabiner hook and belt clip of the ID card holder with ribbon can be securely and quickly attached to your item of clothing, belt loop, belt or bag. Whether it's a business bag, laptop case, backpack or school bag, the ID card yo-yo is always with you.
  • The All Rounder - The card holder ID card is perfect for all types of ID cards, electronic verification cards, security ID cards, keys and USB sticks. Also ideal as a student bus ticket case, credit card case, children's bus ticket case, or work ID case
  • Functionality of the card case with ribbon - The pull-out cord of the Jojo ID card is up to 70cm and can be rolled in and out very easily. This means that the attached document in the card holders is always within reach - without the hassle of searching in your pockets
  • Our customer service: You buy from a Dutch company with a 100% money back guarantee! Your purchase from us is completely risk-free: test our product at your leisure and if you are not satisfied, we will refund you the entire purchase price - no ifs or buts! The statutory right of withdrawal and warranty rights remain completely unaffected and are not restricted.
Bestseller no. 6
Karteo card holder ID case with thumb extension [1 piece] transparent Vertical ID card holder made of hard plastic as a card case for ID cards
  • ID card case: made of hard plastic suitable for service ID cards, subscription cards and many other plastic cards
  • Stable and robust: Card holder made of polycarbonate with a thumb slot suitable for ID badges and cards
  • Simple and convenient: Cards or ID cards can be easily removed from the case with a thumb punch
  • Card format: vertical alignment for cards in EC card format (86 x 54 mm)
  • Many uses: can be combined with a keychain, lanyard, clip or ID badge and much more.
Bestseller no. 7
Karteo ID card sleeve for up to 2 cards [1 piece] Card holder ID card holder horizontal Card sleeve made of hard plastic for ID cards, service ID cards, factory ID cards
  • Card Case Color: Clear
  • Orientation of the map: horizontal
  • Card size: 54 x 86 (debit and credit card size)
  • Special feature: 2 cards can be used
  • Special feature: two red sliders for pushing the card in and out
Bestseller no. 8
ACS ACR39U-N1 PocketMate II USB Chip Card Reader Smart Card Reader, Small Foldable (White)
  • Very small and compact design. Fits in the pocket
  • Electronic ID chip card reading
  • Suitable for quick online identification (e.g. online banking) for reading eID (non-RFID identity card), health and insurance cards, driver cards, etc
  • Works with all operating systems Windows - Apple Mac OSX - Linux
  • Driver manufacturer's website
Bestseller no. 10
ACS ACR39U-U1 USB Chip Card Reader Smart Card Reader Writer eID ID Identity Writer Identity Identification Identity Reader Writer, Black
  • Suitable for quick online identification (e.g. online banking) for reading eID (non-RFID identity card), health and insurance cards, driver cards, etc
  • Works with all operating systems: Windows / Apple Mac OS / Linux
  • Latest driver from manufacturer website (acs.com.hk/en/drivers))
  • Supports ISO 7816 Class A, B and C cards (5V, 3V, 1,8V) smart cards
Bestseller no. 11
VEUWOLM PU Leather Badge Holder Badge Holder with Neck Lanyard Strap and 1 Clear ID Window 2 Card Slots Double PU Leather Badge Holders for Business School Event Black
  • 👮‍♀️【Durable Material】The badge holder is made of high quality PU leather, which is more wear-resistant and durable, and has a long service life. Front pocket with clear plastic window for visibility and protection.
  • 👮‍♂️【Suitable Size】The card case outer size: 12*7,5cm, the inner: 7,5*5,2cm, our ID card holder design is very convenient for you to hold your ID card, card nurse, student ID card etc. to place.
  • 👩‍⚕️【Sturdy Lanyards】 Our lanyards are made of flat nylon, soft and smooth, strong and durable, not easy to deform. The folded length is 47cm, with a snap hook, which is very convenient to remove the ID card holder and carry keys and other items.
  • 👩‍🏫【ID Card Holder Structure】The product includes a vertical ID card holder with a detachable lanyard, 1 piece, perfect for replacement or office replacement.
  • 👨‍⚕️【Many Applicable Scenarios】The lanyard badge holder is suitable for all groups of people and industries, such as: B. Office workers, students, teachers, doctors, nurses, waiters, etc.
Bestseller no. 12
ACS ACR39U-H1 Chip Card Reader Card Reader Driver Card Smart Card Reader USB eID, White
  • Non-slip standing base in vertical position. Convenient to use.
  • Robust housing and long USB cable
  • Reads almost every contact chip smart card (NO NFC!). Supports ISO-7816 Class A, B, and C cards (5V, 3V, 1,8V).
  • Reads tachograph cards and national ID cards and can sign digital signatures. DOES NOT read ID card!
  • Supports all operating systems: Windows 7, 8, 10, Linux, Apple MacOS X, Android 3.1 and above
Bestseller no. 13
Uniclife 2 Card Horizontal Badge Holder with Thumb Slot Hard Transparent PC Protective Case for Office School ID Cards Credit Cards Drivers Licenses and Passports 2 Pack
  • 2 Card Holders: Internal dimensions: 8,9 L x 5,8 W (cm). Accommodates 2 standard 8,6cm x 5,7cm credit cards. Great for ID cards, driver's licenses, badges, ID cards, etc. WILL NOT FIT THICKER CARDS!
  • Quick Access: Convenient thumb slot lets you slide card in and out effortlessly with just one finger. The convenient top-load design holds the card firmly in place so it won't fall out.
  • DURABLE: Made from tough polycarbonate material that resists heat, wear and tear. Effectively protect your cards from being damaged, bent or lost.
  • Crystal Clear: Well built for maximum transparency, bringing you super clear visual effect. Easily read or scan your cards without removing the card sleeve.
  • Easy to Carry: Convenient to attach it to a retractable ID card roll, lanyard or strap through the center slot. And the 2 side holes are punched for cords, threads or keychains.
Bestseller no. 14
ACS ACR39U-U1 RFID Chip Smart Card Reader Reader
43 reviews
ACS ACR39U-U1 RFID Chip Smart Card Reader Reader
  • TAA compliant
  • Supports ISO-7816 Class A, B and C (5V, 3V, 1,8V).
  • FIPS 201 compliant: supports CAC and PIV2 cards. RoHS Compliant.
  • You may need to purchase software for use with CAC/PIV.
  • Certificate of Compliance: FIPS 201, TAA, PC/SC, CCID, CE, FCC, RoHS, Microsoft WHQL, EN 60950 / IEC 60950

This is what Stiftung Warentest says about products in the "ID card reader" segment

Stiftung Warentest examines, compares and tests the best products for consumers. Many of the tests by Stiftung Warentest help in deciding which product to buy. We do not currently know whether there is a test winner from Stiftung Warentest for this product that is recommended for purchase.

Our comparison winner in the field of "card reader ID card"

Compare winner
JETOP card holder ID card, 2 extendable ID card holders, 2 hard plastic ID card holders, 2 soft ID card holders, transparent hard plastic card holder with thumb slot for card holders, key cards
  • [Two Ways to Use]: Unlike traditional ID card holders, the hard plastic ID card holder can be used both horizontally and vertically. The perforation on both sides is convenient and prevents your ID or work card from being scratched, bent or torn.
  • [Thoughtful Design]: The hard plastic ID card holder has a thumb slot to slide out the card easily and can hold 1-2 cards. The soft badge case then has a seal over it which is completely waterproof and drop proof.
  • [Durable Material]: The hard plastic ID card holder is made of hard PC with a thickness of 2mm, which is not easily deformed or broken; The Soft ID Card Case is made of high-strength PC plastic, which is soft and durable.
  • [You will receive]: 2 pieces of hard plastic ID card holder with the external dimensions 9,7*6,5 cm and a card slot for cards: 8,8*5,5 cm; 2 pieces of soft ID card cover with the external dimensions 9,7*8 cm and a card slot for cards: 9,3*6 cm; 2 Extendable badge holders that extend to 68 cm.
  • [Wide Applications]: The ID card holder is suitable for ID cards, membership cards, children's bus cards, driver's license cards, school ID cards, etc. Ideal for hospital staff, nurses, police and students.

Current offers in the field of “ID card readers”

You want the best products in the range "Card reader ID" buy? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the "ID card reader" category.

Bestseller no. 1
Karteo card holder ID case with thumb extension [1 piece] transparent Vertical ID card holder made of hard plastic as a card case for ID cards
Karteo card holder ID case with thumb extension [1 piece] transparent Vertical ID card holder made of hard plastic as a card case for ID cards
Card format: vertical alignment for cards in EC card format (86 x 54 mm)
3,99 EUR −18% 3,29 EUR

Related Articles