1. Guides
  2. »
  3. product guide
  4. »
  5. Accessories
  6. »
  7. Gpu fans – The 15 best products in comparison

Gpu fans – The 15 best products in comparison

Comparative winner of the editors Akasa PCI Slot Bracket for One/Double 120mm Fan, DIY Support 12cm Case Fan Bracket Assembly, PC Fan and GPU Bracket, Computer Radiator Stand, Black Iron, AK-MX304-12BK

Gpu fans – The 15 best products in comparison

Recommended products in the "Gpu fans" section

We have products in the range "Gpu fan" compared with each other and put together recommendations for you. Here you will find the top 15 in the “Gpu fans” section.

GPU fans – the most important things at a glance

A GPU fan is an electronic device that dissipates heat from a graphics card. Most GPU fans consist of an impeller and a motor. Some GPU fans also have a heat pipe heatsink.

GPU fans are divided into two main types: axial and radial fans. Axial fans are the most commonly used fans as they tend to be more powerful and efficient. However, radial fans are usually larger and more expensive.

Most manufacturers of axial fans, such as be quiet!, Corsair and Noctua, also produce radial fans. However, there are some manufacturers who specialize in the production of radial fans, such as BitFenix ​​and SilverStone.

GPU fans typically come in 80mm, 92mm, 120mm, and 140mm sizes. Most graphics cards have an integrated fan, but it is usually not as powerful as an external fan.

In summary, a GPU fan is an important accessory for a powerful graphics card. If you have a high-performance PC with a powerful graphics card, you should consider buying a GPU fan.

The bestsellers in the "Gpu fans" category

A list of the best sellers under the category "Gpu fan" you can find here. Here you can find out which products other users have bought particularly often.

Bestseller no. 1
adspow graphics card holder, GPU graphics card holder, GPU aluminum alloy holder, height-adjustable graphics card holder, aluminum graphics card holder with magnet, 75-125 mm high
  • Metal material: aluminum-magnesium alloy material that provides firm and lasting hold. It is made of metal instead of plastic, can prevent plastic materials from aging, and can be used for a long time.
  • Bottom Magnet and Top Spacer Design: The magnets in the base can stand in the case more stably, and the top spacer can protect the graphics card.
  • The processing of the detail process: The small graphics card carrier consists of three complex processes: polished anode, sandblasted anode and high-gloss CNC high-speed edge washing process. The full anode process can maintain the durability of.
  • Adaptation design: The graphics card bracket adopts an adjustment design, spiral height adjustment, height-adjustable support, which can be compatible with various chassis configurations of traditional and long power supply bays to meet different user hosts.
  • Simple Installation: Just place the GPU graphics card holders directly under the graphics card or attach them to the chassis base plate, screw them to the right length and finally secure them with lock nuts, adjusts different heights to suit different user hosts.
Bestseller no. 2
EZDIY-FAB PCIe 4.0 GPU Bracket Graphics Card Bracket Multi-Angle Adjustment with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable-Black
  • The adjustable GPU mount allows you to show off your GPUs and improve cooling efficiency by mounting them to the PSU shroud or any metal plane vertically or at an angle between 0 and 45 degrees.
  • GPU mount with ARGB LED lighting effects, ARGB lighting syncable via motherboard (AURA, Mystic, Fusion): Supports M/B 3 pin ARGB header (5V, D, G), Please note: Does not support 4pin RGB header ( +12V, G,R,B), 12 volts can destroy LEDs.
  • The base mount is equipped with a strong magnet that keeps the mount stable on the PSU fender.
  • Supports most 1, 2 and 3 slot graphics cards. Premium metal material increases structural strength and supports the largest graphics cards on the market.
  • Equipped with Gen4 riser cable, support PCIE 4.0/3.0/2.0/1.0, compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
Bestseller no. 3
EZDIY-FAB 5V ARGB GPU Holder Bracket Graphics Card GPU Support Video Card Holder Bracket, Sculptable Structure, Graphics Card Bracket Sag Holder/Holster Bracket RX7990XTX, RTX4090, Black-341
  • The Slide Type Support Structure is a flexible mechanism that can support GPUs of various lengths (174-280mm), providing secure installation and adaptability.
  • The stretchable design offers up to 30mm of expandable space, easily accommodating graphics cards of different sizes. Thanks to its stretchability, it can be adjusted both inwards and outwards to securely fix the graphics card.
  • The dual mounting feet provide excellent stability for your graphics card, while the feet can be installed individually or together to increase compatibility with a range of GPU configurations.
  • Experience lasting and stable support with our all-metal bracket structure, complemented by a sleek anodized sandblasted aluminum panel for a stylish and sophisticated look.
  • Syncable ARGB Lighting via Motherboard: Built with the advanced ARGB lighting system, supports 5V 3PIN ARGB motherboard sync, multiple rgb modes can be switched, makes your computer case colorful.* *Please never connect it to 4pin 12VRGB.
Bestseller no. 4
HIBOER Graphics Card Bracket GPU Graphics Card Holder Height-Adjustable GPU Bracket, GPU Holder Graphics Card Holder with Magnets, GPU Support Bracket Made of Anodized Aviation Aluminum (Black)
  • 【Free Height Adjustment】The graphics card bracket is equipped with telescopic screws, which can provide height support between 74-120mm, and we can adjust it freely according to the actual situation. Effective support is provided on the back of the graphics card to keep the high-end long graphics card in a parallel state and reduce its failure rate.
  • 【Magnetic Base】The bottom of the graphics card bracket is equipped with magnets and silicone sheets, which can absorb iron materials such as power supply trays and chassis bottom plates, providing adsorption and stable support.
  • 【Non-slip Silicone】The bottom and top of the GPU bracket are designed with non-slip silicone gaskets, which can effectively buffer and scratch the graphics card, prevent the graphics card from bumping, and ensure the normal operation of the graphics card.
  • 【High Quality】The GPU Holder is made of aluminum alloy with sandblasted + anodized surface, excellent texture and durability. Avoid plastic material aging, can be used for a long time, more durable.
  • 【Instructions for Use】After turning the GPU support telescopic screw counterclockwise to the required support height, turn the middle fixing ring clockwise to the end and lock it.
Bestseller no. 5
EZDIY-FAB Vertical PCIe 4.0 GPU Bracket Graphics Card Bracket with 5V 3 Pin ARGB LED Module,Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle-Black
  • Redesigned mount for vertical display of GPU. Supports most 1, 2 and 3 slot graphics cards. Suitable for most full/mid ATX towers with at least 7 available PCI slots.
  • High quality material increases the structural strength and supports the heavy weight graphics card on the market. Beautiful metal surface treatment, installed in the case to form a beautiful landscape.
  • Vertical GPU mount with ARGB LED lighting effects, Syncable ARGB lighting via motherboard (AURA, Mystic, Fusion): Supports M/B 3 pin ARGB headers (5V, D, G), Please note: Does not support 4pin RGB headers (+12V, G,R,B), 12 volts can destroy LEDs.
  • The stretchable structure allows you to easily connect HDMI and DP cables to your GPU, compatible with PC cases with PCI grids.
  • Please test the riser cable on the GPU first before mounting the GPU on the vertical bracket / Please note the length specifications and make sure your case has enough space.
Bestseller no. 6
ASUS ROG Herculx graphics card holder (support height 72-128 mm, assembly without tools, integrated bubble level, Aura Sync, black)
  • The stand design is compatible with a wide range of chassis and does not occupy PCIe slots.
  • Offers a support height of 72-128mm and makes for a strong, adaptable design.
  • With the help of an adjustment wheel and a release button, you can assemble and disassemble it easily and without tools.
  • The included spirit level simplifies the assembly.
  • The integrated 3D ARGB element is compatible with Aura Sync.
Bestseller no. 7
DolDer Graphics Card GPU Bracket, Height Adjustable, Lightweight, Durable, Polished Graphics Card Bracket Made of Aluminum - Black
  • Metal material: aluminum-magnesium alloy material that provides firm and lasting hold. It is made of metal instead of plastic, can prevent plastic materials from aging, and can be used for a long time.
  • The processing of the detail process - The small graphics card carrier consists of three complex processes: polished anode, sandblasted anode and high-gloss CNC high-speed edge washing process, the full anode process can maintain the durability of
  • Invisible Magnet Design - The magnet hidden in the base is designed for easy installation and a more stable stand in the chassis.
  • Easy adjustment: The design of the graphics card holder is compatible with conventional MATX, ITX and various housing configurations with long power supply brackets and adapts different heights to different user hosts.
  • Adjustable Design: The adjustable height range of the graphics card bracket is 74-120mm, which can be adapted to more types of computer cases.
Bestseller no. 8
KLIM Mistral Laptop Cooler - NEW 2024 - Powerful turbo fan (4500 rpm) - Rubber ring seal for maximum performance - Avoid overheating and protect your gaming notebook - 15-17 inch
  • PROTECT YOUR LAPTOP & CARE FOR MAXIMUM PERFORMANCE. Laptops run the risk of permanent damage, constant crashes, and poor overall performance when overheated, especially when playing video games. Protect your computer with the KLIM Mistral! Its innovative and highly efficient design extremely lowers the temperature of the internal components and extends the life of your laptop. With a small investment, you will save hundreds of euros and a lot of headaches in the long run!
  • THE MOST POWERFUL: In contrast to the traditional notebook cooler, the KLIM Mistral is equipped with two high-performance turbo fans (4500 rpm) that cool down in seconds. The rubber ring acts as a seal to maximize efficiency. This achievement has only one price: it is louder than average, especially at the highest level. You can choose between 3 speeds to find the perfect balance between volume and power.
  • PRACTICAL CONTROLS + ELEGANT RGB LIGHTING: The cooler can be easily adjusted using the three buttons on the front. Simply press "ON" to start the cooler and then select the desired ventilation level with "SPEED". The LED button is used to set the lights in front and on the side from 3 possible colors. You can press and hold the same button to turn the lights off completely if you prefer a more neutral look.
  • DURABLE + HIGH-QUALITY MATERIALS: A cooling pad has to withstand the test of time if it is to protect your laptop for many years. We made sure that only durable materials and reliable components are chosen so you don't have to worry. We are so convinced of this product that we provide 5 years of product support and our experts are available 24/7 for you. It's a completely risk-free purchase.
  • IMPORTANT COMPATIBILITY INFORMATION: This cooler is only compatible with 15 "to 17" laptops. Smaller models are not supported. Your laptop must also have vents on the bottom to allow air to escape. This model is NOT COMPATIBLE with notebooks that do not have a grille on the bottom. (e.g. Apple MacBooks). If you have any questions about compatibility, you can use the “Contact Seller” option on Amazon.
  • WARNING: This cooler contains one of the most powerful fans on the market, which also means it's noisy, especially at high RPM. Please note this if you are sensitive to noise or not using headphones.
Bestseller no. 9
inRobert 95mm PLD10010S12HH RTX3060 RTX3070 GPU Fan for MSI RTX 3070 3060 Ti Ventus 2 x Graphics Card Fan (Fan AB)
  • 95 mm fan, screw hole spacing 40 x 40 x 40 mm with 4-pin connector. Before ordering, please confirm your own fan is the same as our photos
  • Suitable for MSI RTX 3060 Ti Ventus 2X GPU
  • Suitable for MSI RTX 3060 VENTUS 2X graphics card
  • Suitable for MSI RTX 3070 Ventus 2X graphics card
  • The fan does not come with screws, please keep your own screws
Bestseller no. 10
upHere graphics card GPU Brace Support video card tendon holder / holster holder, anodized aerospace aluminum, single or double slot cards (black), GL05
  • Graphics card GPU bracket bracket, VGA graphics card support. Back up your cards from sagging and weighing on the motherboard. Low profile for single or dual setups.
  • Pearl blasted anodized aircraft 6061 grade CNC machined aluminum, comes in 3 colors, red, black, blue.
  • Prevents sagging and stress on the motherboard, adjustable for various video card weights and sizes.
  • Developed for a wide range of graphics cards and boards.
  • The complete kit includes 3 screws, supports and rubber feet. Lifetime guarantee.
Bestseller no. 11
EZDIY-FAB GPU Bracket Graphics Card GPU Support Video Card Bracket with 5V 3 Pin ARGB LED, Video Card Bracket Sag Holder/Holster Bracket Support RX6700, RTX3090-309EZ-Black
  • Elongated and curved design for the latest large GPUs, supports Nvidia RTX 3000 AMD RX5000/6000 series.
  • Adopt sturdy aluminum alloy as the main structure to ensure light weight and strong support.
  • The mounting arm's universal design offers easy customization for a variety of graphics card and PC case combinations.
  • Two kinds of rubber pads included, design for different GPU fan clearance.
  • Equipped with 5V 3pin ARGB LED lights, control and change colors by connecting to motherboard or by other ARGB controller.
Bestseller no. 12
upHere ARGB Graphics Card Holder GPU Aerospace 5V 3Pin Aluminum Graphics Card Bracket(GH03ARGB)
  • 【Function Overview】Can bear the weight of the GPU, eliminate the falling pressure of the graphics card, and protect your components.
  • 【5V ARGB SYNC】Controlled by the main board, matched with bright and saturated LED lamp beads, combined with a clear acrylic shell, offers a more stunning lighting effect mode (monochrome, rainbow, dynamic, static, etc.) that highlights individuality.
  • 【DIY Adjustable Single Slot】The segmented sliding design can better match different types of graphics cards, slide up and down, and freely adjust applicable scenarios.
  • 【High Quality Materials】The base is made of high quality anodized aerospace aluminum and the support frame is made of transparent acrylic material, better reflects the ARGB light effect, which is full of freshness.
  • 【Tool-free Installation】Hidden magnet design at the bottom, can be stably installed in the case without tools. The carrier module is equipped with a scratch-resistant silicone pad and high-gloss basic technology.
Bestseller no. 13
Dotodo T129215SU GPU Card Cooler for ASUS ROG STRIX-GeForce RTX 2070 2080 Super Ti Gaming RTX2080 RTX2080Ti Fan (Fan-ABC)
  • Model: T129215SU
  • Voltage: 12 V direct current, current: 0,50 A.
  • Fan dimensions (L x W x H): approx. 88 mm x 88 mm x 12 mm
  • Mounting holes distance: approx. 32 mm x 32 mm x 32 mm (center to center)
  • Don't buy by graphics card model when buying a graphics card fan as the same type of graphics card has a different fan
Bestseller no. 14
Cooler Master Vertical Graphics Card Holder Kit Ver. 2 incl. riser cable PCIe 4.0 x16-165mm, MCA-U000R-KFVK02
  • SHOWCASE YOUR GRAPHICS CARD --The vertical graphics card holder kit allows a GPU to be installed vertically to better showcase the visual design of the GPU and its cooler.
  • COMPATIBLE WITH ALL STANDARD ATX CHASSIS --The newly redesigned vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots.
  • MODULAR, INSTANTLY ADJUSTABLE DESIGN - The position of the GPU can move back and forth to allow cables to be routed through the chassis with either closed or open PCI slots.
  • DURABLE, HIGH-QUALITY MATERIALS - Thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder
  • COOLER MASTER RISER CABLE INCLUDED - A premium Cooler Master PCI-E 4.0 x16 riser cable completes the vertical GPU holder package.
Bestseller no. 15
YFLAPFAN CPU GPU Fan for Asus TUF Gaming (2020) FA506IH FA506IV FA506IU TUF506IV TUF506IU FX506 FX506LI FX506LU FX506LH GTX1650/1650ti/1666 0ti Series Laptop Replacement Fan (1 Pair)
  • High quality replacement fans
  • 180 days guarantee. If you have any questions, please feel free to contact us
  • Package Contents: 1 x GPU Fan and 1 x CPU Fan
Bestseller no. 16
EZDIY-FAB Vertical Graphics Card Bracket with ARGB 5V 3Pin LED, GPU Bracket, Graphics Card VGA Support Kit with PCIE 3.0 Riser Cable - Black
  • Vertical GPU bracket with RGB-LED effects, synchronizable RGB lighting via the motherboard (AURA, Mystic, Fusion): support of the 3-pin M / B-RGB header (5 V, D, G), note: none 4-pin RGB header (+ 12 V, G), R, B), 12 volts can destroy the LED.
  • The vertical display of a GPU graphics card, compatible with most brands of graphics card, shows the visual design of the GPU and its cooler.
  • Designed for most ATX cases with at least 7 PCIE slots on the market
  • The 20cm/7.8in PCIE riser with high quality TPE cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. Only supports PCIE 3.0
  • With movable bracket, more flexible in using PC case interior space. NOTE: Please check your case with enough space
Bestseller no. 17
JIZZU GPU holder height-adjustable, pack of 2 graphics card supports, GPU holder, black graphics card GPU holder made of aluminum, 72MM-120MM
  • 🛠【Adjustable】The adjustable height range of the graphics card GPU bracket is 72-120MM, which can be adapted to more types of computer cases
  • 🛠【Invisible Magnet Design】The magnet hidden in the base. Designed for a more stable stand in the chassis. The top has a silicone pad to protect the case from scratches and bumps
  • 🛠【Simple Installation】Just place the graphics card holders directly under the graphics card or attach them to the base of the case, screw them to the right length and finally secure them with locknuts
  • 🛠【Instructions for Use】After rotating the GPU support telescopic screw counterclockwise to the required support height, rotate the middle fixing ring clockwise to the end and lock it
  • 🛠【High Metal Material】Graphic Card Bracket Made of aluminum-magnesium alloy material, provides strong and durable support, excellent texture and durability. Can avoid the aging of plastic materials and can be used for a long time
Bestseller no. 18
Cooler Master MasterAccessory ARGB GPU Bracket - Prevents graphics cards from sagging, Tempered Glass with ARGB Illumination, Magnetic Base, Easy Installation
  • GRAPHICS CARD PROTECTION & SUPPORT - The ARGB GPU mount's tempered glass can support high-performance graphics cards to prevent sagging/bending and improves stability on extremities with targeted support
  • TEMPERED GLASS WITH ARGB ILLUMINATION - The transparent tempered glass column has been shaped by CNC (Computer Numerical Control) for even better ARGB backlighting (can be disabled); Includes 510mm ARGB 5V 3 pin cable
  • IMPRESSIVE VERSATILITY - The ARGB GPU mount features two GPU side arms; Each arm is designed for different support bracket positioning (either on the side of the graphics card or at the end)
  • STURDY MAGNETIC BASE - The brace's solid base uses a powerful magnet that easily attaches to steel cases for increased security and stability
  • TOOL-LESS INSTALLATION - The mount features a completely tool-free design for easy installation and quick manual adjustments (from 41mm to 171mm height) by simply sliding and locking the side armrests
Bestseller no. 19
Cooler Master Universal Vertical Graphics Card Bracket - GPU Bracket Kit Version 2 for ATX Cases & PCI-E 3.0 Devices, Modular Graphics Card Support, Includes 165mm Riser Cable V2
  • GRAPHICS CARD PRESENTATION - The Cooler Master Vertical GPU Mount allows a GPU to be installed vertically to better showcase the graphics card and cooler
  • FOR ALL STANDARD ATX CASES - The 2nd version of the vertical GPU bracket kit fits all standard ATX cases with at least 7 PCI slots and offers space for graphics cards of various sizes (up to 2,5 slots)
  • EASY INSTALLATION - The position of the GPU can move back and forth to allow cables to be routed through the case with either closed or open PCI slots
  • DURABLE, HIGH-QUALITY MATERIALS - Thick SGCC steel eliminates sagging from even the largest and heaviest graphics cards
  • INCLUDES 165MM RISER CABLE - The PCIe 3,0 x 16 riser version 2 cable has been redesigned for maximum flexibility and durability; Dimensions GFX holder kit: 184 x 142 x 121 mm (closed)
Bestseller no. 20
EZDIY-FAB 5V 3 Pin RGB graphics card holder, RGB LED video card string holder holder, GPU holder, motherboard Sync-309-1
  • Adjustable for different graphics card weights and sizes
  • Adaptable to a wide variety of motherboards and cases.
  • The combination of aluminum alloy side plates and acrylic intermediate plates can avoid the aging and vulnerability of a single material and can be used as a long term component.
  • The all-anode process can maintain the durability of the surface texture and keep the color unchanged for a long time.
  • Synchronize the RGB lighting through the motherboard: - You MUST work with an addressable RGB capable (+ 5V, 3-pin) motherboard or an addressable RGB controller (+ 5V, 3-pin) (Please check before purchasing the ARGB motherboard of your motherboard!)

This is what Stiftung Warentest says about products in the "Gpu fan" area

Stiftung Warentest examines, compares and tests the best products for consumers. Many of the tests by Stiftung Warentest help in deciding which product to buy. We do not currently know whether there is a test winner from Stiftung Warentest for this product that is recommended for purchase.

Our comparison winner in the "Gpu fan" area

Compare winner
adspow graphics card holder, GPU graphics card holder, GPU aluminum alloy holder, height-adjustable graphics card holder, aluminum graphics card holder with magnet, 75-125 mm high
  • Metal material: aluminum-magnesium alloy material that provides firm and lasting hold. It is made of metal instead of plastic, can prevent plastic materials from aging, and can be used for a long time.
  • Bottom Magnet and Top Spacer Design: The magnets in the base can stand in the case more stably, and the top spacer can protect the graphics card.
  • The processing of the detail process: The small graphics card carrier consists of three complex processes: polished anode, sandblasted anode and high-gloss CNC high-speed edge washing process. The full anode process can maintain the durability of.
  • Adaptation design: The graphics card bracket adopts an adjustment design, spiral height adjustment, height-adjustable support, which can be compatible with various chassis configurations of traditional and long power supply bays to meet different user hosts.
  • Simple Installation: Just place the GPU graphics card holders directly under the graphics card or attach them to the chassis base plate, screw them to the right length and finally secure them with lock nuts, adjusts different heights to suit different user hosts.

Current offers in the area "Gpu fans"

You want the best products in the range "Gpu fan" buy? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the "Gpu fans" category.

Related Articles