Are you looking for the best high-end amplifiers, but are unsure how to make the best choice from the large number of different products? Since the selection of high-end amplifiers is large and to give you a better overview of the different products to make your purchase decision easier, we have taken a closer look at different high-end amplifiers and comparing individual products.
We have many product recommendations for different high end amplifier put together so that you too can find what you are looking for and the perfect product. We want to make sure that you are satisfied with your product and that you enjoy it. So you can choose the product that best suits you and your ideas and wishes.
Here you will find different products related to the topic high-end amplifier.
Contents
Recommended High End Amplifiers
We have compared various high-end amplifiers and put together our product recommendations for you at a glance. Here you will find the top 16 among the best high-end amplifiers - have a look now.
The bestseller among the high-end amplifiers
You can find a list of the best-selling and current bestsellers in the high-end amplifier category here. This list is the best way to find out which products other users have bought most often. There is guaranteed to be a product here for you.
Bestseller no. 1
Pro-Ject Head Box RS high-end headphone amplifier black
- Fully symmetrical double mono construction
- tube input stage
- Class-A FET output stage
- Selectable output impedance for optimal playback
- Extremely low-noise for maximum dynamics and detail
Bestseller no. 3
Active Sub
- All-in-one sound upgrade: The PWD-X5 features a digital sound processor (DSP), a compact subwoofer and a 4-channel amplifier - all in one box. This is perfect for smaller vehicles and customers who don't want to install a lot of different devices in their car. The built-in amplifier delivers 4 x 50 watts for the speaker channels and 240 watts for the built-in subwoofer (peak power). Mounting brackets and an electrical kit are included in the set
- Compact Installation: The very compact size of just 350mm length x 245mm width x 80mm height allows the PWD-X5 to be installed under the front seats of many vehicles. It can also be easily installed in the trunk of hatchback or coupe cars. The total weight of the product is just over 5 kg
- Extensive sound tuning features use the built-in 10-band parametric EQ, digital time correction and digital crossover to tune your vehicle's sound. You can perform the main setup by connecting a PC running the free Alpine software or via the included wired controller. There's also a smartphone app that allows users to switch between presets and adjust subwoofer and volume on the go
- Wide connectivity options, you can connect the PWD-X5 to an aftermarket radio via RCA inputs. If you have an original radio in your car that does not have RCA connectors, you can connect it to the DSP amplifier via the high power inputs. There are also 2 USB ports for the included external Bluetooth dongle and to connect the wired remote control and PC for setup
Bestseller no. 4
1Mii Bluetooth 5.0 HiFi receiver for stereo system, Bluetooth audio adapter with audiophile ESS DAC (384kHz / 32bit), aptX HD, LDAC, Opt/RCA output for AV receiver or amplifier (black)
- [Professional PCB Design] The ES9018K2M SABRE32 reference DAC is a high-performance 32-bit 2-channel audio D/A converter, which is suitable for audio preamplifiers and premium A/V receivers. Nichicon multi-stage audio capacitor array, low-noise amplifier, Bluetooth 5.0 chip CSR8675 and professional PCB design ensure HiFi sound quality.
- [Support LDAC Lossless Audio Decoding] The Bluetooth receiver is equipped with an advanced high-resolution LDAC lossless audio decoder, the sampling rate of which can reach up to 96kHz/24bit, which is twice that of aptX-HD (the sampling rate of aptX-HD is 48 kHz).
- [Digital & Analog Connection] The 1Mii Bluetooth Audio Receiver offers ultimate compatibility with your stereo devices via analog RCA and digital optical SPIDIF outputs.
- [Upgrading Your Old Hi-Fi Stereo System] The 1Mii Receiver is a premium Bluetooth Hi-Fi receiver that can wirelessly stream the high-resolution audio from your smartphone, tablet or computer to any stereo system. Super easy to use, just plug and play.
- [Advanced CSR 8675 Chipset] The Bluetooth receiver is equipped with the advanced CSR 8675 chipset to support MP3/aptX-HD/aptX/aptX-L/aptX-LL/AAC/SBC and LDAC lossless decoding. Adopting the latest Bluetooth 5.0 technology, your Bluetooth stereo receiver can be backward compatible with Bluetooth 4.2/4.0/3.0/2.0, providing your devices with a more stable wireless connection.
119,99 EUR
View product
Bestseller no. 5
Yamaha A-S701 Stereo Integrated Amplifier (including D/A Converter) Silver
- Top-ART Construction / High Quality Components / Custom Power Transformer / 12,000 uF Block Capacitors / Extruded Aluminum Heat Exchangers
- Simple, elegant design (device front and operating elements made of aluminum)
- Connection for YBA-11 Bluetooth wireless adapter
- Digital audio inputs for TV or Blu-ray players
- Scope of delivery: Yamaha A-S701 stereo integrated amplifier silver, remote control
612,00 EUR
View product
Bestseller no. 6
Magnat Monitor Reference 5A, Bluetooth stereo floor-standing speaker with HDMI, high-quality phono preamplifier, 1 pair, black
- Fully active Bluetooth stereo floorstanding speaker set with phono input and HDMI
- Versatile thanks to numerous connection options for smartphones and tablets via Bluetooth, turntable, TV via HDMI and other analog and digital sources, HDMI with ARC and CEC function (basic functions can be controlled via TV remote control)
- Bluetooth input (version 5.0) supports high-end audio standard aptX Low Latency for high-quality and almost delay-free music playback from mobile devices
- High-quality phono preamplifier for direct connection of a turntable with MM pickup system
- Fully active: Thanks to the built-in amplifier module, no external amplifier is required
Bestseller no. 7
AXTON A201: Powerful 2-channel car amplifier, 2 x 150 watts, Class-D digital power amplifier with high-level inputs, suitable for vehicles with automatic start/stop
- For those who want to upgrade their music system with a compact but powerful quality amplifier, car audio specialist AXTON has the 2-channel power amplifier A201 in its range: at least 10,5 cm wide and 4 cm high, this amplifier with 2 x 150 watts offers a lot Performance in the smallest space. Thanks to its compact dimensions, the Class D amp can be installed flexibly in a car, motorhome or caravan.
- The elegant, black aluminum housing has first-class workmanship and a well thought-out design: Despite the compact dimensions, the solid heat sink conducts the heat outwards in a targeted manner, thus ensuring an optimal operating temperature throughout.
- The amplifier circuit has been carefully designed, the design of the circuit board layout is optimized for low distortion and is only equipped with selected components.
- Thanks to the sophisticated interaction of all components, this high-quality amplifier plays at the highest level: the A201 reproduces every piece of music with transparency, gripping dynamics and, above all, genuine joy of playing.
- The integrated electronic crossovers, each with 12 dB/oct. Edge steepness are continuously adjustable from 40 - 400 Hz and can be switched as a high-pass or low-pass filter. There are also high-level inputs with an auto-turn-on function for connection to original radios without a cinch output
Bestseller no. 8
Eton MOVE10-300AR - Active 25cm subwoofer in bass reflex housing - 150 watts RMS - integrated amplifier - 2 x 2 ohm impedance
- ETON MOVE10-300AR - Active 25cm subwoofer in bass reflex housing
- 150 watts RMS integrated amplifier
- 2 x 2 ohm impedance, characteristic sound pressure: 87,4 dB
- newly developed MDF Bass-Reflex wooden housing
- Dimensions: L 450mm x W 330mm x D 333mm
Bestseller no. 9
Eton MOVE12-400AR - Active 30cm subwoofer in bass reflex housing - 200 watts RMS - integrated amplifier - 2 x 2 ohm impedance
- ETON MOVE12400AR 30 cm active subwoofer in a bass reflex enclosure
- Built-in 200W RMS amplifier
- Impedance 2 x 2 ohms. Sound pressure: 87,4 dB
- BassReflex MDF wooden cabinet
- Dimensions (L x W x D): 500 x 350 x 385 mm.
221,61 EUR
−9%
201,00 EUR
View product
Bestseller no. 10
Audio System Carbon 500.1 D Mono 1 channel digital mono amplifier 500 watts RMS
- Mono 1 channel digital mono amplifier 500 watts RMS
Bestseller no. 11
AXTON A401: Powerful 4-channel car amplifier, 4 x 100 watts, Class-D digital power amplifier with high-level inputs, suitable for vehicles with automatic start/stop
- For those who want to upgrade their music system with a compact but powerful quality amplifier, car audio specialist AXTON has the 4-channel power amplifier A401 in its range: at least 10,5 cm wide and 4 cm high, this amplifier with 4 x 100 watts offers a lot Performance in the smallest space. Thanks to its compact dimensions, the Class D amp can be installed flexibly in a car, motorhome or caravan.
- The elegant, black aluminum housing has first-class workmanship and a well thought-out design: Despite the compact dimensions, the solid heat sink conducts the heat outwards in a targeted manner, thus ensuring an optimal operating temperature throughout.
- The amplifier circuit has been carefully designed, the design of the circuit board layout is optimized for low distortion and is only equipped with selected components.
- Thanks to the sophisticated interaction of all components, this high-quality amplifier plays at the highest level: the A401 reproduces every piece of music with transparency, gripping dynamics and, above all, genuine joy of playing.
- The integrated electronic crossovers, each with 12 dB/oct. Edge steepness are continuously adjustable from 40 - 400 Hz and can be switched as a high-pass or low-pass filter. There are also high-level inputs with an auto-turn-on function for connection to original radios without a cinch output - this means that the amplifier can be easily combined with factory-installed radios.
Bestseller no. 12
AXTON AT401 - Powerful 4-channel 24 V amplifier for trucks, class D digital power amplifier with high-level input, suitable for trucks and motorhomes with 24 volt on-board power supply, 4 x 100 W
- If you drive your truck for days or weeks, you want a convincing sound in your vehicle. Retrofitting an amplifier is a simple measure to improve the performance and sound of factory systems or multimedia/navigation devices enormously - without replacing the entire system.
- With the powerful 4-channel quality power amplifier, AXTON has an amplifier in its range that provides powerful sound and a clearly audible sound upgrade. The AT401 is designed for trucks, truck-based motorhomes and other vehicles with a 24 V electrical system.
- Minimum 10,5 cm wide and 4 cm high, this class D amp offers a lot of power in the smallest space and can be installed flexibly. Despite the compact dimensions, the solid aluminum heat sink conducts the heat outwards in a targeted manner, thus ensuring an optimal operating temperature at all times. The amplifier circuit has been carefully designed, the circuit board layout is optimized for low distortion and is equipped exclusively with selected components.
- The performance of 4 x 100 watts RMS up to 2 x 350 watts RMS bridged is convincing and makes this digital amplifier the perfect system power amplifier for various applications.
- The integrated electronic crossovers, each with 12 dB/oct. Edge steepness are continuously adjustable from 40 - 400 Hz and can be switched as a high-pass or low-pass filter. There are also high-level inputs with an auto-turn-on function for connection to original radios without a cinch output - this means that the amplifier can be easily combined with factory-installed radios.
Bestseller no. 13
Nubert nuPro X-6000 RC | black floorstanding speaker | Bluetooth speaker aptX HD | Loudspeaker connection wireless High Res 192 kHz/24 bit | Active box with 3.5 ways | high-end speakers
- CONSTRUCTION: The 3.5 ways Loudspeakers offers a tweeter, a midrange driver and two woofers. The HiFi active loudspeaker already has an integrated amplifier. Just connect sources and get started
- FUNCTIONS: The nuPro X-Boxes offer ten inputs for direct connection: 1 x HDMI ARC, 2 x optical, 2 x coaxial, 1 x Aux In, 1 x XLR, 1 x AES EBU, USB and Bluetooth 4.2 with aptX HD
- SCOPE OF DELIVERY: 1 Loudspeakers, 1 power cable, 1 remote control, 1 removable magnetic fabric cover, HDMI-ARC adapter, cables: 1 x optical, 1 x coaxial, 1 x jack to cinch, 1 x USB-A to USB-B, BDA
- DETAILS: The nuPro X-6000 RC offers a completely digital signal path in High Res resolution. You can use the sound scale to adjust the sound. The remote control allows convenient operation
- Nubert has been developing for over 45 years Loudspeakers and hi-fi products with passion. Call us on 0717187120 and let our experienced consultants inspire you
Bestseller no. 14
EMPHASER EA-MT1 - high-performance 1-channel digital amplifier, mono class-D power amplifier, powerful subwoofer amp for cars, bass amplifier with 1 x 450 W RMS
- Outstanding quality, timeless design, unique performance - the EA-MT1 mono amplifier from EMPHASER's Monolith series not only offers concentrated power, but also outstanding dynamics and special signal fidelity. Minimal distortion and powerful, dynamic bass reproduction are properties that characterize this digital top power amplifier.
- Measuring only 212 x 35 x 110 mm, this very compact bass amplifier offers high performance in the smallest of spaces. The extraordinary heat sink design made of die-cast aluminum enables significantly smaller dimensions while maintaining excellent temperature management. The optimized Class-D amplifier circuit, in conjunction with the massive heat sink, ensures enormous power: With 1 x 450 W RMS at 4 ohms and 1 x 600 W RMS at 2 ohms, the EA-MT1 is an optimal power source for every subwoofer.
- This 1-channel digital power amplifier is also impressive in terms of sound: the EA-MT1 underpins any type of music with a dynamic, level-stable and powerful bass foundation.
- On the equipment side, this amplifier offers an extensive crossover with 12 dB/oct. Subsonic filter, adjustable from (15 – 40 Hz), and 12 dB/oct. Low-pass filter, adjustable from (50 – 500 Hz). The EA-MT1 has an integrated bass boost (0 - 15 dB @ 40 Hz) and a variable phase shift (0 - 180°). All controls are hidden under the massive bar with the EMPHASER logo.
- There are also cinch and high-level inputs as well as an auto-turn-on function for connecting to original radios without a cinch output - this means that the 1-channel amplifier EA-MT1 can be easily combined with factory-installed radios. A bass level remote control is included. Also available from EMPHASER: the 4-channel power amplifier EA-MT4 (ASIN B09L8LCPSL)
Bestseller no. 15
AXTON ATB220: compact bandpass subwoofer, bass box for cars, plug & play bass box with 2 x 20 cm woofer chassis, 300 watts
- The ATB220 bass box was developed for music lovers who want to give their sound the necessary space, but still don't want to do without trunk loading space. Measuring 29,5 x 66,5 x 35,5 cm, the ATB220 continues where some subwoofers run out of breath - and generates enormous bass waves with playful ease, which impressively stage every electro beat, every guitar riff and every bass drum.
- AXTON's bandpass subwoofer is a completely new development in which the housing size, practicality and equipment are perfectly matched. Two high-performance 20 cm woofers work in the low-resonance housing, and they have it all: Equipped with torsion-resistant paper cones with rubber surrounds and large 2"/50 mm voice coils on polyimide carriers, the drivers ensure powerful bass with rapid acceleration. The high linear Xmax value of +/- 5,5 mm speaks for itself...
- The housing is made of stable MDF and covered with robust fleece. The port is flow-optimized to minimize air turbulence. The back of the case is beveled so that the bass box takes up as little space as possible when placed on the rear seat backrest.
- The plug & play bass box is quickly connected to the amplifier via the pressure terminal, also on the back of the box, and can be removed from the trunk just as quickly if necessary.
- The impressive performance of 300 watts, 94 dB/1 W/1 m and the excellent installation qualities make the smart ATB220 a convincing overall package with which bass can be easily implemented in the car.
Bestseller no. 16
SMSL Sanskrit 10th High-End DAC USB Optical Coaxial Input (Black)
- High-end AK 4493 and carefully customized to maximize performance.
- 2 Japanese NDK clocks with ultra-low phase noise, significantly reducing the JITTER of the system
- Built-in high quality power modules that deliver ultra-high performance using only USB power.
- Built-in gravity accelerometer switches the screen automatically!
- Compatible with mobile phones, iPad, computers and other devices and compatible with Android, Apple system.
Bestseller no. 18
SMSL D1se High Resolution Audio DAC, ES9038RO D/A chip from ESS, high resolution MQA full decoding 768kHz/32bit DSD512 XMOS, USB/Optical/Coaxial/Bluetooth 5.0 input
- Adopt ESS's high-end D/A chip ES9038RO, a DAC chip that achieves the industry's high index. The SNR is as high as 140 dB and the total harmonic distortion plus noise is -122 dB. At the same time, it is a 32-bit eight-channel DAC chip with high resolution and high dynamic frequency response. D1se achieves a low distortion rate of 0,00009% (-121 dB).
- USB / Optical / Coaxial / Bluetooth 5.0 input, RCA / XLR output. Bluetooth 5.0 supports aptX/ACC/SBC, USB asynchronization transfer, USB compatible Windows 7/8/8.1/10, Mac OSX, Linux. Except Bluetooth, other input ports support DSD transmission, coaxial and optical support DoP64!
- USB uses XMOS
- ESS high-performance DAC dedicated power supply chip ES9311, the power supply noise is only 1μVrms, pushing the performance of ES9038PRO to the limit.
- If you encounter any problems while using the product, please contact our customer service team. We have a dedicated person who will look after you and answer your questions satisfactorily. The product you purchased will be serviced for free for one year!
Bestseller no. 19
iFi Audio iDAC converter + amplifier for headphones, silver
- Manufacturer's guarantee: 12 months
Bestseller no. 20
SABAJ A10d Hifi Audio DAC, AK4497EQ Chip High Resolution Bluetooth 5.0 USB Optical Coaxial XMOS DSD512 PCM OPA1612 with Remote Control
- AK4497EQ chip - This is a new generation of advanced 32-bit dual-channel digital-to-analog converter chips using VELVET SOUNDTM technology. It achieves industry-leading characteristics with low distortion and wide dynamic range.
- 4 Input Modes - The case is frosted, with moderate gloss and metallic texture. The interfaces are all designed on the back. It is convenient for wiring and prevents interference from other devices. It has four input modes: USB, optical, coaxial and Bluetooth 5.0.
- Higher output level - If you select Pr1, the output level of the DAC can reach 3,0 Vrms. At this time, the sound is more direct, the high frequency is more transparent, and a larger sound field can be obtained. Pr0 is fixed mode. The DAC volume is currently not adjustable and the output level is 2,0 Vrms.
- Independent LDO Power Supply - Built-in high performance power purification system, using a special filter circuit to reduce background noise and distortion, the sound more clear and pure. Make every musical detail clear.
- Second Level TI-OPA Chip - Equipped with German Instruments (TI) second level OPA1612-OPA chip, excellent current carrying capability and transient conversion rate provide high quality and powerful signals for your headphones. Bring a wider sound field and excellent sound quality analysis.
161,99 EUR
View product
Current offers for high-end amplifiers
You want to buy the best high-end amplifier? In this bestseller list you will find new offers every day. Here you will find a large selection of current products for high-end amplifiers. Have fun shopping!
Bestseller no. 1