1. Guides
  2. »
  3. product guide
  4. »
  5. Headphones & Headsets
  6. »
  7. Headset holder – The 15 best products in comparison

Headset holder – The 15 best products in comparison

Comparative winner of the editors KIWIFOTOS Headphone Stand Headphone Holder with 360° Rotating Headset Bracket Holder, Headphone Stand Desk Headphone Hanger Headphone Clip Gaming Headset Holder - Black

Headset holder – The 15 best products in comparison

Recommended products in the "Headset Holder" section

We have products in the range "Headset holder" compared with each other and put together recommendations for you. Here you will find the top 15 in the “Headset Holder” section.

Headset holder – the most important things at a glance

When looking for a headset holder, you have two main options. You can opt for a traditional stand that attaches to your Desk or table, or you can opt for a headset strap to wear around your neck. Both options have their pros and cons that you should consider before making a decision.

Stands provide a firm base for your headset and ensure it always stays in place. However, you must ensure that the holder is suitable for your headphone size, otherwise it may not hold properly. Also, depending on the size and weight of your headset, stands can be difficult to transport.

Headset straps tend to be lighter and more compact than stands, making them ideal for on-the-go use. However, they are not as stable as stands and can fall or slide more easily. Before choosing a HeadsetBand, you should make sure that it is good enough for your headset.

In terms of cost, there is not much difference between the two options. Headset straps tend to be a bit cheaper, but it also depends on where you buy them. Both options are usually quite affordable, so you don't have to worry about paying too much.

When choosing a headset holder, there are a few different types to consider. The most common are brackets that attach to your desk or magnets that attach to your monitor. Clamps have the advantage of being easy to install and remove, but they can damage your table if you're not careful. Magnets have the advantage of not damaging your table, but they can be more difficult to install.

Headset straps come in a variety of sizes and designs. The most common are elastic straps that fit around your neck or Velcro straps that attach to your clothing. Both options have their pros and cons that you should consider before making a decision.

Headset straps are usually a good choice for those who wear their headsets frequently. They are compact and lightweight so you can take them with you anywhere, and they tend to stay in place where you place them. However, it is important to Band to find one that is both comfortable and durable so you can wear it for a long time without it

The bestsellers in the "Headset Holder" category

A list of the best sellers under the category "Headset holder" you can find here. Here you can find out which products other users have bought particularly often.

Bestseller no. 1
KIWIFOTOS Headphone Stand Headphone Holder with 360° Rotating Headset Bracket Holder, Headphone Stand Desk Headphone Hanger Headphone Clip Gaming Headset Holder - Black
  • 【360° Rotating Hook - Convenience and Versatility】KIWIFOTOS Headphone Headset Mount features a 360 degree rotating hanger that allows you to adjust the hook inward/outward/multi-directional to save space and avoid accidental bumps to prevent.
  • 【Non-slip Rubber Pads & Cable Clip Design】Silicone anti-slip pad inside the hook protects your headphones themselves from scratches and falls. This headphone hanger features a clip on the side that holds the headphone cord/plug in place.
  • 【Spring Clip Bracket】Headset Holder Clamp Adjustable Range: 10-40mm - This spring clip with anti-slip pads allows you to adjust it according to the different thickness of tabletop or where you want and easy to attach and detach.
  • 【Wide Compatibility】This headphone stand fits all headphones up to 60mm wide. Load capacity ≦ 1kg, also can be used to hold other things (such as game controllers, cables and other gadgets). Made of ABS + aluminum alloy + silicone.
  • DESK ORGANIZER: This holder will keep your desk/table neat, clean and well-organized. This headphone stand helps you hang all kinds of headphones (such as wireless headphones, noise canceling headphones, gaming headsets, phone headsets and so on.
Bestseller no. 2
New bee RGB headphone stand, gaming headset stand, headset holder, wireless charge headphone holder with 1 x USB, 7 lighting effects modes, black
  • 【RGB Lighting】New Bee 9 RGB headphone stand from Bee offers 7 lighting modes, the cool visual effect can create any atmosphere. Press and hold for 3 seconds to turn off/on the lights.
  • 【Sturdy and Safe】The aluminum helmet holder offers good stability, and the non-slip silicone pad on the bottom prevents the holder from falling even on a smooth surface. The part of the holder where the headphones are placed is made of high-quality TPU rubber. The head beam of the helmet can be protected from scratches even after hanging for a long time.
  • 【Universal Compatibility】RGB headset stand for all sizes of headsets, headset holder, the wide base and the wide curved stand can better protect your headset. Height - 9,53 inches, width - 4,47 inches.
  • Easy to install: headphone stand. Only three installation steps are required to get a complete stand. Whether at home, in the office, in the recording studio, in the bedroom or next to your computer, the headphone holder is the ideal choice for your headphones.
  • 【Don't hesitate to order】Headphone holder 36 months worry-free warranty with considerate customer service, if you have any problems or suggestions, please feel free to contact us, we will provide fast and easy-to-reach support for you.
Bestseller no. 3
MOSUO Headphone Stand, Universal Headphone Holder Aluminum Headset Bracket Gaming Headset Adjustable Clamp Headphone Stand for Bluetooth Headphones, Children's Headphones, Black
  • 【Durable & Scratch Resistant Design】Made of high quality aluminum alloy, super solid and durable to hold heavy headphones and other items. Soft silicone pads on the clamps protect yours Desk or your headphones from damage.
  • 【Horizontal & Vertical Usage】The headset stand's detachable design (Comes with mini allen wrench) can be attached to vertical or horizontal surfaces such as tables/lockers/cabinets. Flexible choices for different needs.
  • 【Foldable Design Saves Space】The headset holder can be folded up when not in use, saving space. The headphone stand perfect for all size headphones to organize your desk and keep it clean and tidy.. Perfect for your office or home!
  • 【Easy to Install】This headphone stand adopts a rotating screw mounting design, can be fixed firmly on a table of different thickness (up to 5cm/1.96in). No other tool is needed, very easy to install and disassemble.
  • 【Universal Headset Stand】Suitable for most types of headphones: Bluetooth headphones, noise canceling headphones, gaming headphones, children's headphones, sports headphones, studio headphones, surround headphones and others. For almost every over-ear and on-ear headphone.
Bestseller no. 4
Headphone stand New Bee universal headphone holder for over ear headphones, gaming headset and headphone display, made of aluminum + TPU + ABS black
  • STABLE AND SECURE - The aluminum alloy center bar is stable and slim; Rubber stabilizers under the surface ensure a secure stand. Soft and protective rubber on the top prevents scratches or damage to the headphones. High quality ABS & TPU rubber material, safe and durable.
  • EASY TO ASSEMBLE - Simply put 3 parts together within 30 seconds and you have a perfectly standing, beautiful and representative headphone stand.
  • SAVE SPACE ON THE DESK -- When you don't use the headphones, you can store them easily, safely and space-savingly. Perfect for your office or home!
  • USAGE - Suitable for most types of headphones: bluetooth headphones, noise canceling headphones, gaming headphones, telephone headsets, children's headphones and many more
  • WARRANTY - 3 YEARS warranty, if you have any problems or suggestions please contact us. Your satisfaction is important to us.
Bestseller no. 5
KDD RGB Headphone Holder, Headset Holder Rotatable with 9 Light Modes, Controller Holder with 2 USB Ports, Type-C Port & 3,5mm AUX, Gaming Headphone Stand for Gamers (Black)
  • 【9 RGB Light Modes & One-button Control】 The RGB gaming headphone holder provides 9 light effect modes: 7 fast flashing colors, 7 breathing light colors and one single color light mode: red, green, blue, purple, light blue, and yellow white to create a fantastic gaming atmosphere. By pressing the color mode change button, you can choose the lighting modes in different scenes.
  • 【Rotatable Headset Mount & Detachable Controller Holder】 It offers the option to hold a headset and two controllers or four game controllers at the same time. Suitable for all sizes of branded headsets and compatible with a variety of controllers. Contains a very soft protective rubber to avoid scratches or possible damage to your devices.
  • 【With USB Port, Type-C & 3,5mm Audio Jack】Equipped with 2 USB ports for plug and play data and file transfer. Perfect for smartphones / cooling stands / power banks or other smart USB chargers. In addition, thanks to the 3,5mm jack, you can use different types of headphones with 3,5mm audio jacks. It also has a Type-C connector that gives you more connectivity options.
  • 【Easy Installation & Portable Design】 Just put 3 parts together and in 30 seconds you will have an elegant and practical stand for headphones and controllers. It's very convenient to put your headset and/or controllers down when you're not using them and allows you to keep your Desk to keep clear. Our Headphone Stand is fully detachable, making it a portable device.
  • 【Universal Compatibility & Safe Use】 No driver required, just plug and play. KDD gaming headphone stand is compatible with WinXP/7/8/10, Linux, Mac and other operating systems. Made of a reinforced plastic body that ensures durability, our headphone stand has a built-in button to connect or disconnect all circuits and power, which is very convenient and safe.
Bestseller no. 6
New bee Headphone Stand RGB Headset Holder with USB Type-C Chargers and Data Transmission Universal Gaming Headphone Holder for All Headphones (Black)
  • 【RGB Lighting】New Bee Z8 RGB headphone stand has 7 colors of lighting modes, the cool visual effect can create any atmosphere. Press and hold for 3 seconds to turn on/backlight.
  • 【2 Extensive Ports】USB-C port and USB port can be used to transfer files or charge your phone, iPad or other smart devices. Supports Windows, Linux and Mac systems with plug and play function. No additional drivers are required. (Note: Doesn't support wireless charging.)
  • 【Sturdy and Safe】Made of aluminum, the headset stand ensures good stability, and the non-slip silicone pad on the bottom prevents the mount from falling even on a smooth surface. The part of the stand where the headphones are placed is made of high quality TPU rubber. The head beam of the headset can also be protected from scratches after hanging for a long time.
  • 【Universal Compatibility】The RGB headphone holder fits all sizes of headsets. The wide base and wide curved stand can better protect your headset. Height - 9,53 inches, width - 4,47 inches.
  • 【Don't hesitate to order】36-month worry-free warranty with attentive customer service. If you have any problems or suggestions, please feel free to contact us. We offer you support that is quick and easy to reach.
Bestseller no. 7
THE G-LAB K-Stand RADON Gaming Headphone Stander - RGB Backlit USB Hub 2 x 2,0 Non-Slip Base - Universal Gamer Headphone Mount for PC PS4 Xbox One (Black)
  • PRACTICAL + COMPATIBLE WITH ALL HEADPHONES. With the K-Stand Radon, your headset will never be easy on your again Desk lying around. This gaming headphone headset can take care of your headset and free up your desktop to save space. The K-Stand Radon is perfect for all gaming headsets, regardless of helmet type or brand. It is an essential accessory to complete your game settings.
  • 7 COLOR BACKLIGHT. Unlike many gaming headphones, the K-Stand Radon is a backlit headset. There are 7 different colors: red, green, blue, yellow, purple, turquoise and white. The light effect "breathing" connects the colors one after the other. Both practical and aesthetic, the K-Stand Radon will quickly become a part of your gaming setup! We also added a small, bright Easter egg. Do you find it 😉
  • MULTIFUNCTIONAL. The K-Stand Radon is not only used as a support for gamer headphones, but also serves as a USB hub. The base of the Radon is equipped with two USB 2.0 ports to facilitate your connections, one on each side. These additional USB ports make it easier to charge your mouse, keyboard, gaming headset, USB stick or even your smartphone. It is an ideal accessory.
  • ELEGANT + STABLE DESIGN. We have equipped the K-Stand Radon with a rubber base for perfect stability, it doesn't move an inch. This helmet mount is lightweight, space-saving and proudly sits on your desktop. Its unique design will not go unnoticed by your friends. The quality of the surfaces has been specially processed. Very easy to use, just plug it into USB and it works right away. No software is required.
  • DURABLE + 2 YEAR GUARANTEE. At The G-LAB, we are committed to testing all of our products to ensure the best possible quality. If the product doesn't suit you, return it for free on Amazon within 30 days for a full refund. Very attentive to the opinion of our customers, our French customer service is always there to help you if necessary and to answer you within 24 hours.
Bestseller no. 9
Lamicall Headset Mount, Headphone Stand - Magnetic Foldable Headphone Holder, Universal Self-Adhesive Headphone Hook for Over Ear Headphones, Gaming Headset and Headphone Display - Black
  • 【Strong Stickiness】This headphone stand comes with strong adhesive tape. Due to its strong adhesion, it can be firmly attached to your Desk, office, bedside table, bed, headboard, table and other smooth and clean surfaces such as plastic, metal, wood or glass. ❗ Note: This stand cannot be used on painted and whitewashed walls. (Maximum weight up to 500g)
  • 【Magnetic Foldable Design】This headphone holder comes with a magnet, so it can be folded by magnetic force when not in use. This design is good for saving space. Provide a nice and sturdy little hook for your earphones, charging cables or other small items.
  • 【Easy to Install】Just peel off the sticker and then stick the sticky side where you want. No complicated operations are needed to get a versatile headphone hook. ❗ Note: Please make sure the surface is smooth, clean, dry and oil-free. And hang the headset after 24 hours to ensure the stability of the bracket.
  • 【Humanized Design】The front of the headset holder table features a raised design. This can effectively prevent the earphone from falling out. In addition, the arm of the headphone holder is also equipped with soft rubber pads to protect your headset from slipping and scratching.
  • 【Wide Compatibility】This under-desk headset mount is compatible with almost all wireless and wired headphones, such as AirPods Max, Sony, Beats, Bose, AKG, B&O, JBL, B&W, HyperX Cloud II's, Astro, Turtle Beach, ROG gaming headphones, telephone headset, etc.
Bestseller no. 10
KDD Headset Holder with 360° Rotating Headphone Holder - 3 in 1 Controller Holder & Replaceable Cup Holder Table, Universal Headphone Stand for Most Headsets, Controllers, Cups
  • 🎧 3 IN 1 DESIGN: Universal design to accommodate a gaming headset and two game controllers. You can also replace the controller holder with a cup holder table according to your needs. This headset holder is perfect for all kinds of headphones and controllers, cup, crusher, cell phone and other devices.
  • 🎧 SCRATCH-RESISTANT HEADPHONE STAND: To protect your tables, the two ends of the clamp have rubber pads. Soft and protective rubber pads on the headphone holder and controller holder prevent scratches or damage to your high-quality headphones and controller.
  • 🎧 EASY TO REMOVE & REASSEMBLE: Easy to use, no assembly required. You can attach this headset holder to the desired location at any time. Using the locking screw, the headphone stand can be easily installed without drilling holes or glue.
  • 🎧 360° ROTATABLE & HEADPHONE CABLE ORGANIZER: KDD headset stand with a headphone cable organizer allows you to manage the headphone cable well, makes your Desk tidier. Secure the headphone cable to the headphone cable organizer so it doesn't drag on the floor or get tangled in your office chair legs.
  • 🎧 MULTIPURPOSE HEADSET HOLDER: KDD controller holder is suitable for attaching to desks, cupboards, glass surfaces, monitors, work surfaces, shelves, etc. thanks to its round clamping arm and clamps. Attach the clamp to the table top using the locking screw. The table top thickness can be 5-50 mm, so this cup holder can be used writing desk Can be universally attached to most desks.
Bestseller no. 11
Gvolatee headset holder, detachable headphone stand with TPU non-slip silicone for all headphone sizes, headset stand for over-ear headphones and gaming headphones, suitable for table, showcase
  • 【Compatible with All Size Headphones】The gaming headphone holder is a good companion for headphones. This gaming headset holder is suitable for all types of earphones and headphones. The height of 24cm is also sufficient for larger earphones. The soft and flexible TPU rubber pad on the top can gently fix any style and shape of headphones without scratching the headphones.
  • 【Save Space】Keep away from clutter Desk away, the slim and light design does not look overloaded. You just need to give the headphone holder some space, it won't get in your way. Make your desktop more organized and clean, and bring convenience to your life.
  • 【Stable and Secure】The design of the desk headphone holder is simple but timeless, and the desk headphone holder base has a non-slip design to ensure the stability of the desk headphone holder. Note: When placing the headset table headset holder on the Desk sure that Desk is flat.
  • 【Multifunctional】Lightweight and portable, small size, especially suitable for home, bedroom, study, office, study, commodity display, it is also the best choice for gifts.
  • 【Easy to Assemble】The headset stand is easy to assemble, no gluing or drilling required. You just need to combine the 3 parts within 30 seconds and you will have a perfect and beautiful headset stand with storage function.
Bestseller no. 13
aikeec Metal Headphone Stand Controller Holder Cup Holder 3 in 1 Adjustable Headset Mount Table Controller Stand for PS5 PS4 Xbox Series X Cup Holder Headphone Holder
  • 🎧【True 3-in-1 Design】Comparing to products on the market, we realized a true 3-in-1 that combines controller holder, cup holder, headphone stand. This allows you to enjoy games and drinks while also having a place for headphones and other items without having to keep changing them. It keeps table clean and tidy so you can focus on your gaming experience without being bothered by space-consuming cups and gamepads.
  • 🎮︎【Aluminium Alloy, Higher Durability】Made of aluminum alloy, Aikeec bracket is more durable and less prone to failure compared to ABS bracket on the market. It is also rust and corrosion resistant, ensuring a long service life. In order to better protect your Premium Headphones & Controllers, the clamp, cup holder bottom and platform for placing items have been equipped with rubber pads, which can effectively prevent scratches.
  • 🥤【Improve Desk Clutter】Compared to the hollow design cup holder, our cup holder has an all-inclusive design, which can prevent a small amount of water from spilling. You can also use two game controllers at the same time, if you only have one controller, you can detach it or hang other items. The all-black design brings a sense of fashion and blends well with different styles of decoration.
  • 🪛【Easy Installation】Aikeec bracket only needs to be used with a screwdriver (included) and screws (included) to firmly integrate each panel to ensure the strength of the bracket. This also makes it easier for the user to remove the bracket if necessary. The adjustable clamp can be clamped on tables with different thicknesses from 8-50mm, which means you can freely choose the mounting position of the bracket and improve the utilization.
  • 🛎【Widely Use】Aikeec Controller Holder Stand is not only suitable for most game controllers, earphones and cups, but also can store other items within 20LB, e.g. such as hats, handbags, etc. If you have any questions about this item, please email us on Amazon, we will definitely give you a satisfactory answer.
Bestseller no. 14
KDD Gaming Headset Stand, Controller Holder & Headphone Holder Table, Headphone Stand with Aluminum Rod, Universal Headphone Stand for Headphones Controller Switch iPad Mobile Phone (Black)
  • ▶▶【Cable Hole Design】The newly improved cable hole design can organize your cables easily and quickly, so that your gaming headphone cables can be wrapped in the cable holes in perfect order, and can also be used for controller charging cables.
  • ▶▶【Excellent Stability】These headset holders feature a metal base, a sturdy headphone hanger and a low center of gravity design to provide excellent stability without worrying about being hit. The controller & headphone hook is covered with rubber to prevent slipping. And the bottom of the headphone holder is equipped with a silicone pad to prevent slipping and protect your electronic devices well.
  • ▶▶【Size】The headset holder table is about 28,5cm high, 17cm long, 15cm wide, it is super easy to take with you wherever you go - this headphone stand is small and light. This wireless headset stand with unique and stylish design, ideal for home, office, studio, bedroom or next to your TV.
  • ▶▶【Universal Compatibility】This game headphone holder is suitable for vertical placement of various gamepads, which is very space-saving, and up to 2 gamepads and 1 headphone can be placed. You can put the game controller on the stand, and you can also hang headphones and other items. At the same time, the groove of the storage organ can hold smartphone, iPad, Switch.
  • ▶▶【Easy to assemble】Our headphone stand can be assembled easily, conveniently and quickly with our package list. You just need to install following the installation steps of the manual, it took about 5 minutes to assemble and was really easy to do.
Bestseller no. 15
Newaner headset holder, removable headphones with TPU non-slip silicone for all headphone sizes, stand for over-ear and gaming, suitable for table, showcase
  • 【Compatible with All Size Headphones】The gaming headphone holder is a good companion for headphones. This gaming headset holder is suitable for all types of earphones and headphones. The height of 24cm is also sufficient for larger earphones. The soft and flexible TPU rubber pad on the top can gently fix any style and shape of headphones without scratching the headphones.
  • 【Stable and Secure】The design of the desk headphone holder is simple but timeless, and the desk headphone holder base has a non-slip design to ensure the stability of the desk headphone holder. Note: When placing the headset table headset holder on the Desk sure that Desk is flat.
  • 【Save Space】Keep away from clutter Desk away, the slim and light design does not look overloaded. You just need to give the headphone holder some space, it won't get in your way. Make your desktop more organized and clean, and bring convenience to your life.
  • 【Multifunctional】Lightweight and portable, small size, especially suitable for home, bedroom, study, office, study, commodity display, it is also the best choice for gifts.
  • 【Easy to Assemble】The headset stand is easy to assemble, no gluing or drilling required. You just need to combine the 3 parts within 30 seconds and you will have a perfect and beautiful headset stand with storage function.
Bestseller no. 16
Mars Gaming Mhh Headset Clamp Mount Adjustable 360º Rotatable
  • OPTIMIZED DESIGN: The MHH features a sturdy ABS structure with non-slip rubber bumpers and a sleek, professional finish
  • FULLY STABLE: The non-slip pads on the arms of the MHH keep the stand firmly on the table without damaging it, giving you a stable and totally reliable grip
  • STRONG GRIP: The MHH's clamping mechanism has the necessary pressure to support the weight of your headphones; it is perfectly optimized for use on tables, shelves and any horizontal surface
  • PRACTICAL AND SIMPLE: The MHH mount has a streamlined design to keep your headphones within reach. It takes up little space and is easy and simple to rotate
  • EXTENDED DURABILITY: The structure of the MHH is very durable and easily supports the weight thanks to the strong and safe ABS housing
Bestseller no. 17
SPORTLINK Headset Bracket Holder - Universal Headphone Hook Wall Mount Earphone Hanger with [Strong Adhesive Tape] for Multiple Devices, Desk, Wall, Table, Gaming Headphones (Black)
  • ♫【Convenient and Versatile】SPORTLINK headset mount allows you to mount your headset almost anywhere, including on a wall, table or computer case. Unlike other mounts that are too narrow to hold larger gaming headsets.SPORTLINK Headset Hanger has an oversized bracket to hang all your headphones.
  • ♫【High Quality ABS Material】This headphone wall mount is made of high quality ABS material, sturdy and durable, not easy to damage, and can serve you for a long time. More importantly, the silicone cushion is designed to protect your headphone headband from wear and tear when hanging.
  • ♫【Safe and Secure】The self-adhesive headphone hooks on the wall use 3M strong glue, no nails or holes required, and can withstand 1KG weight. We use strong adhesive to ensure the headphone hangers stay installed for a long time. It is suitable for most flat and clean surfaces. Please do not mount these headphone mounts on wallpaper or rough surface.
  • ♫【Fashion, Simple, Space Saving】The headphone holder is different from other traditional hooks, the unique fashion curved organizer design fits your headphones better and provides a stable base for your headphones on any wall or surface. At the same time, this headphone hook is light and generous, a good helper for organizing your desk, easy to place your headphones on it when not in use, will save more space.
  • ♫【Easy Installation】We use a proprietary, non-marring 3M adhesive for strong, reliable adhesion to most storage surfaces. Installing and removing is easy and will not damage the wall. Suitable for all gaming headsets, over-ear headphones and in-ear headphones, you can give them as gifts to your friends, people who enjoy playing games or listening to music.
Bestseller no. 18
6amLifestyle Headphone Headset Holder Hook Mount, Under Desk Space Saving Headphone Holder Hanger Headphone Holder Display for Sony, Sennheiser, Beats, Audio-Technica, Bose, Shure, AKG Hook
  • ✅【Headphone Hook】Looks simple and elegant, show off your headphones well when not in use. Make space on your Desk and keep things in order.
  • ✅ 【Sturdy and Scratch Resistant】: The headphone hook is made of aluminum and silicone to provide a secure and stable base for your headphones.
  • ✅【Easy to Install】2 mounting methods with a strong 3M tape or 2 screws, installs in minutes, stays in place and looks great in any environment.
  • ✅ 【Versatile Uses】These hanger brackets can be used on vertical surface or horizontal surface, such as under desks, tables, shelves, closets and shelves.
  • ✅【Universal Compatibility】: Suitable for all kinds of headphones, such as wired headphones, wireless headphones, kids headphones, gaming headphones, TV headphones and so on.
Bestseller no. 19
Moko Game Controller Holder/Headset Stand, 2 in 1 Acrylic Universal Holder for PS4 PS5 Xbox One Xbox Series Holder Gaming Accessories, Controller Headphone Holder Stand Accessories, Black & Clear
  • Quality Materials - This 2 in 1 stand is made of quality acrylic material for durability. The transparent acrylic material and the black base are perfectly combined, showing the good texture of the stand. This stand is perfect to display your home, office and your Desk to keep neat.;Compatibility - This controller stand is perfectly compatible with mainstream gamepads such as PS4, PS5, PS4 Xbox, One Xbox, Series X, Xbox 360 Switch Steam, Steam, Switch and more. In addition, the headphone stand can also hold a headphone.;High Stability - The base of the stand is stable and equipped with non-slip rubber. Therefore, it has excellent stability and will not tip over. Highly stable material prevents your controller and headset from slipping off when the stand is hit.;Save space - The game controller stand is vertical and can hold 2 gamepads and 1 headset. So he saves more space on the Desk and keeps your gaming accessories organized. Your gaming accessories will no longer be lost due to messy placement.;Great Gift - This controller stand is a great gift for family, friends, kids, friends, festivals, birthdays, anniversaries and other celebrations. If you have any questions or concerns, please feel free to contact us. We're here to help within 24 hours.;328.0 grams
Bestseller no. 20
aceyoon Headset Holder, Foldable Headphone Stand Made of Aluminum Universal Headphone Holder with Cable Organizer Headphone Stand for All Gaming Headsets and Bluetooth Headphones (Black)
  • [ Upgraded Version ]: The headphone holder added two small holes to organize wired headphones and USB cables and keep your headphone cord in place and prevent your cords from snagging or sliding on the floor. Hold your Desk cleaned up. Very convenient.
  • [ Foldable and lightweight ]: The headset holder can be folded when not in use, and when folded, it is smaller than the palm of your hand, which can effectively save space. In addition, it weighs only 150g, making it easy to carry and store.
  • [ Anti-Scratch Design ]: The hook is covered with a silicone pad, which is non-slip and prevents objects from being scratched. The surface of the headphone stand is also covered with silicone to prevent scratching the desktop. You can use it with confidence!
  • [ Multifunction & Solid ]: The Universal Headphone Stand is made of aluminum alloy adopting anodyn oxidation process, which is wear-resistant, durable, stable and anti-aging. This metal headset stand can support the weight up to 5kg, it is also possible to hang handbags, umbrellas, jackets, etc. Very convenient for storing and organizing your items in the office.
  • [ Simple operation ]: This headset holder table adopts a rotating screw mounting design, it adapts to the table whose thickness is between 0 and 5cm. No other tool is needed, you just need to adjust it according to the thickness of the tabletop and then fix it.

This is what Stiftung Warentest says about products in the “Headset Holder” area

Stiftung Warentest examines, compares and tests the best products for consumers. Many of the tests by Stiftung Warentest help in deciding which product to buy. We do not currently know whether there is a test winner from Stiftung Warentest for this product that is recommended for purchase.

Our comparison winner in the "Headset Holder" category

Compare winner
KIWIFOTOS Headphone Stand Headphone Holder with 360° Rotating Headset Bracket Holder, Headphone Stand Desk Headphone Hanger Headphone Clip Gaming Headset Holder - Black
  • 【360° Rotating Hook - Convenience and Versatility】KIWIFOTOS Headphone Headset Mount features a 360 degree rotating hanger that allows you to adjust the hook inward/outward/multi-directional to save space and avoid accidental bumps to prevent.
  • 【Non-slip Rubber Pads & Cable Clip Design】Silicone anti-slip pad inside the hook protects your headphones themselves from scratches and falls. This headphone hanger features a clip on the side that holds the headphone cord/plug in place.
  • 【Spring Clip Bracket】Headset Holder Clamp Adjustable Range: 10-40mm - This spring clip with anti-slip pads allows you to adjust it according to the different thickness of tabletop or where you want and easy to attach and detach.
  • 【Wide Compatibility】This headphone stand fits all headphones up to 60mm wide. Load capacity ≦ 1kg, also can be used to hold other things (such as game controllers, cables and other gadgets). Made of ABS + aluminum alloy + silicone.
  • DESK ORGANIZER: This holder will keep your desk/table neat, clean and well-organized. This headphone stand helps you hang all kinds of headphones (such as wireless headphones, noise canceling headphones, gaming headsets, phone headsets and so on.

Current offers in the area "Headset Holder"

You want the best products in the range "Headset holder" buy? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the "Headset holder" category.

Related Articles