1. Guides
  2. »
  3. product guide
  4. »
  5. Gaming
  6. »
  7. Gaming PCs
  8. »
  9. Atx Mini Tower – The 15 best products in comparison

Atx Mini Tower – The 15 best products in comparison

Comparative winner of the editors Cooler Master MasterBox Q500L - ATX mini tower case with full side panel display, clean routing and multiple cooling options

Atx Mini Tower – The 15 best products in comparison

Featured products in the Atx Mini Tower section

We have products in the range Atx Mini Tower compared with each other and put together recommendations for you. Here you will find the top 15 in the "Atx Mini Tower" category.

Atx Mini Tower – the most important things at a glance

MiniATX cases are computer cases that have been specially developed for installing a MiniATX mainboard. Such a case is usually smaller and lighter than a standard ATX case, making it perfect for compact PCs. However, most MiniATX cases are not as compact as MicroATX cases and therefore offer more space for expansion cards and other components.

If you install a MiniATX motherboard in a standard ATX case, you can still install expansion cards such as graphics cards and sound cards, but space for other components such as hard drives is limited. In a MiniATX case, however, this is not a problem, since there is correspondingly less space.

Another advantage of a MiniATX case is that it usually consumes less power than a standard ATX case. This is ideal for energy efficient PCs. However, some manufacturers also offer MiniATX cases with a Power Supplies are equipped, which consumes as much power as a standard ATX case.

However, most MiniATX cases are not as compact as MicroATX cases. This is because they usually have more room for expansion cards and other components. However, most MiniATX cases are also more expensive than MicroATX cases.

The bestsellers in the "Atx Mini Tower" category

A list of the best sellers under the category Atx Mini Tower you can find here. Here you can find out which products other users have bought particularly often.

Bestseller no. 1
Cooler Master MasterBox Q500L - ATX mini tower case with full side panel display, clean routing and multiple cooling options
  • DETACHABLE MAGNETIC DUST FILTERS - The bespoke magnetic dust filters at the front and top are completely removable and offer a refined, minimalist and at the same time functional look.
  • VERTICAL OR HORIZONTAL - The MasterBox housing has rubberized thumbscrews that allow a standing or laying direction with fully perforated panels for multiple airflow configurations.
  • MULTIPLE COOLING OPTIONS - The front panel can accommodate up to two 140mm fans or a 240mm water cooler. A 120 mm cooling module (fan or cooler) is located on the rear, while two 120 mm fans can be accommodated on the top.
  • INTERIOR VIEW - The square transparent side panel allows for a complete interior view and contains an I / O panel that can be rotated in three different orientations on either side. Behind the motherboard compartment there is 28 mm space for neat cable management.
  • SUPPORTS STANDARD ATX - When accommodating a standard ATX motherboard, the power supply unit is mounted in a height-adjustable bracket at the top of the housing. With mini-ITX builds, the power supply unit can be placed in the standard position from bottom to back for better ventilation of the front panel.
Bestseller no. 2
Lian Li O11 Air Mini PC Case (SPCC/Aluminium/Tempered Glass, ATX, Mini Tower) Black, O11 AIR Mini Black
  • Lian Li O11 Air Mini PC Case (SPCC/Aluminium/Tempered Glass, ATX, Mini Tower) Black, O11 AIR Mini Black
Bestseller no. 3
Lian Li O11D S O11 Dynamic Mini Snow Edition Midi-Tower Gaming, Housing White Side Window, O11D MINI S
  • PC case ATX Tower Supports mainboard formats up to ATX and graphics cards up to 395 millimeters in length; Gaming Case ATX also supports powerful, air-conditioned CPU coolers up to 170 millimeters high
  • PC case 9 fans; Computer case allows up to 9 fans (3x 120mm/2x 140mm on the top and bottom, 2x 120mm/140mm on the side and 1x 120mm on the back)
  • PC case water cooling it offers enough space for an individual liquid cooling system; up to 360 mm radiators (1x 360/280 mm above and below and 1x 280/240 mm on the side) fit easily into the case
  • Front panel PC gaming case includes 1x USB 3.1 Type-C, 2x USB 3.0 Type-A and a 3,5mm combo jack; the Gaming PC Tower also offers space for 4 drives (2x 2,5" and 2x 2,5/3,5") and SFX power supply
  • tempered glass case; PC Full Tower consists of aluminum parts: the frame and cover, the right panel in white and the front and left side of tempered glass with a thickness of 4 millimeters
Bestseller no. 4
Fractal Design Define 7 Mini Black - Solid - Brushed Aluminum/Steel Micro ATX Silent Mini Tower Computer Case
  • Compact yet spacious interior accommodates mATX and Mini ITX motherboards
  • Room for GPUs up to 331 mm with a 240 mm radiator in the top, or 306 mm with 25 mm thick fans in the fronts
  • Support for 2x 2.5”/3.5” drives and up to 4x 2.5” drives (2x 2.5” brackets included)
  • Top panel effortlessly swaps from solid steel to filtered ventilation
  • Removable top panel design opens up to fully expose the case interior for effortless installation and cable routing
Bestseller no. 5
Tacens ORUMX, Micro-ATX Mini-Tower Slim Case, Ultra Compact, Steel Frame, 80mm Fan, Black
  • ULTRA STRONG STEEL STRUCTURE: The ORUMX is an ultra-compact mini-tower with a high-quality, ultra-thick steel structure that gives your system great durability and stability; the steel structure also gives it an elegant and modern look that complements any space
  • LARGE COOLING CAPACITY: The ORUMX is equipped with a 80mm rear fan that provides constant airflow to keep your components cool and protected; proper ventilation is essential to ensure your system runs smoothly and prolong the life of your components
  • SLIM MINI TOWER WITH EXPANDED INTERNAL CAPACITY: The ORUMX mini tower offers support for MicroATX and Mini-ITX motherboards, making it an excellent choice for those looking for a compact yet expandable mini tower; it also offers space for up to four hard drives, including two 3" hard drives and two 5" SSD hard drives, capacity for VGAs up to 2,5mm - 277mm (with hard drive installed in the front) and coolers up to to 255 mm; Power supply: SFX format (not included)
  • AVAILABLE IN BLACK AND WHITE: Elegant and modern design in black or white to match your personal style or the decor of your space
Bestseller no. 6
The Tower 100 Black
  • ✔️The Tower 100 is a vertically designed case constructed entirely of solid steel. The vertical design allows for a smaller cabinet footprint and helps minimize clutter to your play and work space
  • ✔️The Tower 4's three 100mm tempered glass windows are thicker and more scratch resistant when compared to standard acrylic
  • ✔️The Tower 100 has well-designed magnetic filters on the two inner sides and bottom. The removable filters offer excellent dust protection and thus ensure a dust-free environment.
  • ✔️Supports a CPU cooler with a maximum height of 190mm, VGA with a maximum length of 330mm, a power supply with a length of up to 180mm, two 2,5" side mount SSDs and two 2,5". -inch or two 3,5 inch hard drives at the back (without rear fan)
  • ✔️There are two 3.0 USB and one USB 3.1 (Gen 2) Type-C ports on the top for direct access when needed.
  • ✔️Mainboard: 6.7” x 6.7” (Mini ITX)
Bestseller no. 7
Lian Li O11 Dynamic Mini Midi Tower Tempered Glass Black
  • PC case ATX Tower Supports mainboard formats up to ATX and graphics cards up to 395 millimeters in length; Gaming Case ATX also supports powerful, air-conditioned CPU coolers up to 170 millimeters high
  • PC case 9 fans; Computer case allows up to 9 fans (3x 120mm/2x 140mm on the top and bottom, 2x 120mm/140mm on the side and 1x 120mm on the back)
  • PC case water cooling it offers enough space for an individual liquid cooling system; up to 360 mm radiators (1x 360/280 mm above and below and 1x 280/240 mm on the side) fit easily into the case
  • Front panel PC gaming case includes 1x USB 3.1 Type-C, 2x USB 3.0 Type-A and a 3,5mm combo jack; the Gaming PC Tower also offers space for 4 drives (2x 2,5" and 2x 2,5/3,5") and SFX power supply
  • tempered glass case; PC Full Tower consists of a black aluminum frame and lid, an aluminum right panel, and a 4 mil thick tempered glass front and left side
Bestseller no. 8
Kolink Stronghold M Micro-ATX Case, Tower PC Case with Tempered Glass, PC Case with Fan, Gaming PC Case Glass, Transparent, PC Case Black, Black
  • MICRO-ATX HOUSING; The PC case supports the installation of motherboards of the sizes MATX and Mini-ITX; the maximum height of the CPU cooler is 160 mm and the maximum length of the graphics card is 330 mm
  • TWO PRE-INSTALLED FANS; Kolink includes two 120mm PWM fans in the computer case to ensure perfect airflow, there is a space for additional 2x120mm on the front and 1x120mm on the upper case
  • WATER COOLING COMPATIBLE; The gaming case is designed for the installation of water cooling and offers enough space in the front for a radiator up to 240mm long
  • GLASS HOUSING, SIDE TRANSPARENT; transparent glass is an excellent offer for users who want to keep an eye on the working of components
  • PSU SHIELD; A key feature of the Kolink Stronghold M is the PSU Shield; This serves to isolate the PSU from the rest of the computer, allowing key components to run at a lower temperature
Bestseller no. 9
iTek Evoke New Concept Mini Tower, mATX, Mini ITX, 2xUSB3, 0.8mm, ITGCAEVKB, Black
  • The EVOKE Case is a new way of understanding and seeing the "cabinet" box in dimensions and concepts. Extremely versatile and therefore adaptable for many solutions and applications. Aesthetically very elegant, with high quality materials and the black logo on black black, it looks very charming. But if you want to make it more aggressive, you can buy the glass side protector separately to show off the full performance.
  • The EVOKE housing, which is only 303 mm high, 185 mm wide and 391 mm long, offers the possibility of installing Micro ATX and Mini ITX motherboards, SFX or ATX power supplies, enabling the installation of graphics cards in portrait or landscape format and heat sinks with a Height of up to 155mm (with horizontal GPU), but not limited to this!!!! Also suitable for coolant of 240 mm.
  • The EVOKE case has a very effective airflow that is almost completely perforated through the three walls (sides and top) and the possibility to install different 8 and 12 cm fans. Also important is the number of hard disk drives for 3,5" and 2,5" HDD/SSD up to 7 drives.
  • The EVOKE Case is a new way of understanding and seeing the "cabinet" box in dimensions and concepts. Extremely versatile and therefore adaptable for many solutions and applications. Aesthetically very elegant presents itself with premium materials and the black logo in black really fascinating... But if you want to make it more aggressive you can buy the side protector separately to show the full performance.
Bestseller no. 10
Gaming PC case Argo - midi tower, RGB lighting (incl. control), glass side panel, glass front, pre-assembled fans, E-ATX, ATX, Micro-ATX, Mini-ATX, black
  • The ARGO is an ATX tower with a tempered glass/aluminum look that presents itself in the best light with its RGB lighting. Its lighting is compatible with all common RGB technologies such as ASUS AURA Sync, MSI Mystic Light or Gigabyte RGB Fusion and can be synchronized with other compatible hardware components.
  • The generous amount of space and numerous rubberized cable guides inside enable a very structured system design. The power pack is installed under a cover in the floor area. This separates it both thermally and optically from the rest of the hardware.
  • Four pre-assembled RGB fans ensure a powerful airflow, which can be further enhanced by three additional case fans. Even large WaKü radiators up to 360mm in length find enough space in this tower.
  • Two dust filters are integrated in the housing to minimize immissions. One is located below the power supply unit in the floor area and a second, larger dust filter, which can be easily removed for cleaning thanks to the magnetic fixation, is located in the ceiling area. The Argo offers space for four 3,5"/2,5" hard drives and can also be equipped with long graphics cards up to a length of 36 cm.
Bestseller no. 11
Cooler Master TD300 Mesh PC Case - Mini-Tower for Micro-ATX & Mini-ITX, High Airflow Gaming Case, 2 x 120mm ARGB Fan, Tempered Glass Side Panel, Removable Lid, ARGB/PWM Hub
  • OPTIMAL AIRFLOW - Constructed with Cooler Master FineMesh technology for high airflow and simultaneous dust filter function; Incl. 2 x 120mm ARGB Sickleflow fans and integrated PWM/ARGB hub (max. 4 fans); Total space for 6 fans
  • TEMPERED GLASS SIDE PANEL - A continuous tempered glass side panel to showcase system builds; A fully removable top cover for better access during component assembly (especially cooler and fan solutions)
  • COOLING OPTIONS - Designed for front air intake with top/rear exhaust; The front panel supports max. 3 x 120mm fans / 1 x 360mm radiator, top side max. 2 x 140mm fans / 1 x 280mm radiator, rear panel 1 x 120mm fan / 120mm radiator
  • MICRO-ATX MOTHERBOARD - The interior accommodates Mini-ITX and Micro-ATX motherboards and features a repositionable HDD/SSD cage under the PSU shroud for additional cooler space or a longer PSU
  • INTERNAL DIMENSIONS - Supports CPU cooler (heatsink or water pump) up to 166mm in height, graphics cards (GPU/GFX) up to 344mm in length and a power supply unit (PSU) up to 325mm in length
Bestseller no. 12
Fractal Design Focus G Mini Black Window - PC Case - Midi Tower with Side Window Case Modding for High-end Gaming PC - Black
  • Efficient design allows the installation of high-performance components with compact dimensions
  • Large viewing window in the side panel allows a clear view of the interior components
  • Two pre-installed Fractal Design Silent Series LL 120 mm fans with white LED lighting
  • Dust filters on the front, top and bottom for a dust-free interior
  • Compatible with tall cpu coolers, multiple radiators and graphics cards up to 380mm in length
Bestseller no. 13
MSI MAG FORGE M100A mini-tower PC case - supports Micro-ATX & Mini-ITX, mesh front, 4x 120mm auto RGB fans, magnetic dust filter, USB 3.2 Gen 1 Type-A
  • MICRO-ATX GAMING CASE - The MAG FORGE M100A is a mini-tower for Micro-ATX & Mini-ITX mainboards with a compact case of 388 x 200 x 423mm. The large-volume air intake at the front offers optimized airflow for efficient system cooling
  • MAXIMUM AIRFLOW - Full length mesh front with 3x 120mm Auto RGB fans. Rear with 1x 120mm ARGB fan and dust filter on top (magnetic) and bottom (non-magnetic). Supports up to 6x 120mm fans and 3 radiators (2x 240mm, 1x 120mm)
  • SIMPLE SHOWCASE - The built-in auto-RGB fans and the sturdy acrylic side panel make the FORGE M100A an excellent choice for ideally highlighting the internal components and the backlight
  • INTERNAL LAYOUT - The clear cable management supports up to 300mm long GPUs (4 expansion slots), up to 160mm high CPU coolers and an ATX power supply. Hard drive bay options: 2x 2", 1x 2,5/3,5" and 1x 3,5".
  • I/O PANEL - The I/O panel at the top front includes power and reset buttons, microphone/audio ports, 2x USB 2.0 Type-A ports and one USB 3.2 Gen 1 Type-A port (5Gbits ). Note: The LED switch has no function on the M100A
Bestseller no. 14
DEEPCOOL MATREXX 30, mini tower, M-ATX/Mini-ITX, tempered glass, larger air intake area
  • Larger area of ​​air intake mesh on the front
  • Country of origin: China
  • Bottom loaded PSU
  • 15mm spacing for cable management
Bestseller no. 15
AMANSON PC case - mini mid tower computer gaming case (without ARGB fan), H8, black
  • [The Coolest PC Case] ​​The H8 Mini ATX Gaming Case is equipped with 2 tempered glasses, allowing a clear view of the RGB lighting and components inside the building, creating a great gaming atmosphere.
  • [Cooling System] The AMANSON H8 Mini Midi Tower PC Case accommodates 7ARGB 120mm fans to provide lighting while maintaining good airflow. Support for Amanson PC cases, Micro-ATX and Mini-ITX motherboards.
  • [Enough space for cable management] AMANSON H8 midi tower computer case with extra space inside, maximum length 320mm GPU, top of PC case for mounting 240mm radiators.
  • [Powerful I/O Panel] This gaming PC case has 2 USB2.0 ports, 1*USB3.0 port, 1 HD audio and a power button. The Micro ATX gaming case offers more comfort and entertainment for gamers.
  • [Cable Management] - Rear bays: 1x 3,5" HDDs and 1x 2,5" SSDs. Removable storage cable box; Designed reasonable return hole.
  • [Package] 1*PC case, WITHOUT ARGB FAN!
  • No risk of purchase: If you have any problems with your case, please feel free to contact us by clicking "S0ld-by-AMANSON Direct", we will try our best to help you! AMANSON is committed to providing our customers with the best support!
Bestseller no. 16
Fractal Design Define Mini C, PC Case (Midi Tower) Case Modding for (High End) Gaming PC, black
  • Compact housing for ATX or Micro ATX builds with sound insulation and moduvent technology
  • Tempered glass side panel for a clear view of the interior
  • Flexible storage options with space for up to five hard drives.
  • Optimized for ideal airflow and quiet operation.
  • Power supply cover hides the additional hard drive cage and annoying cables.
  • Connectivity technology: SATA
Bestseller no. 17
Aerocool Trinity Mini, Mini ATX Tower Case, Tempered Glass Side Panel, 1 x 12cm FRGB Fans, 2 x FRGB Fans, Black
  • DESIGNED FOR MAXIMUM VENTILATION: The TRINITY computer case is designed to give you the best ventilation for your case and components at all times; With a mesh design on the front panel, it provides expanded ventilation and airflow while still allowing you to see the lighting from your 14cm FRGB front fans attached to the front panel
  • OPTIMUM VENTILATION: This mini tower features a dual chamber design to draw heat away from the main chamber and supports up to 5 fans in the front (2x 14cm FRGB included), top and rear (1x 12cm FRGB included) of the case and up to 2 additional 12cm fans above the power supply for maximum VGA cooling; it also supports 120/240mm front liquid cooling and 120mm rear liquid cooling for maximum efficient cooling
  • HIGH PERFORMANCE MINI TOWER: On the top of the case there are 2 USB 3.0 and USB 2.0 ports, microphone and HD audio as well as the reset and power buttons; Easily and quickly connect your favorite peripherals and accessories to the multiple ports on the TRINITY gaming case; Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 158mm and high-performance graphics cards up to 297mm (without front radiator)
Bestseller no. 18
Gaming PC case Cronos Silent Mini - mini-tower, soundproofed, low-noise, pre-assembled fans, Micro-ATX, Mini-ATX, black
  • The CRONOS Silent Mini is a compact and elegant mATX tower. Despite its small design, it offers plenty of space for hardware installation. Graphics cards up to 39 cm can be installed and there are mounting places for a total of seven HDD/SSD.
  • A maximum of three case fans can be mounted for optimal ventilation. One case fan each on the front and back is already pre-installed, leaving room for another fan.
  • Even WaKü radiators with a maximum length of 120 mm find their place in the Cronos Mini.
Bestseller no. 20
AeroCool CS100 Mini Tower Micro ATX ACCS-PC05014.11 Black
  • All black mini towers for portable desktop power with a smaller footprint.
  • Install a 5,25 inch ODD. Also install two 3,5" hard drives and one 2,5" SSD.
  • Supports high-end graphics cards up to 325mm long and 111m wide. (300 mm length with front fan with a length of 325 mm without front fan)
  • Install additional 12cm fan to keep your GPU from overheating
  • All black inside and out with a thickness of 0,5mm.

This is what Stiftung Warentest says about products in the "Atx Mini Tower" area

Stiftung Warentest examines, compares and tests the best products for consumers. Many of the tests by Stiftung Warentest help in deciding which product to buy. We do not currently know whether there is a test winner from Stiftung Warentest for this product that is recommended for purchase.

Our comparison winner in the "Atx Mini Tower" area

Compare winner
Cooler Master MasterBox Q500L - ATX mini tower case with full side panel display, clean routing and multiple cooling options
  • DETACHABLE MAGNETIC DUST FILTERS - The bespoke magnetic dust filters at the front and top are completely removable and offer a refined, minimalist and at the same time functional look.
  • VERTICAL OR HORIZONTAL - The MasterBox housing has rubberized thumbscrews that allow a standing or laying direction with fully perforated panels for multiple airflow configurations.
  • MULTIPLE COOLING OPTIONS - The front panel can accommodate up to two 140mm fans or a 240mm water cooler. A 120 mm cooling module (fan or cooler) is located on the rear, while two 120 mm fans can be accommodated on the top.
  • INTERIOR VIEW - The square transparent side panel allows for a complete interior view and contains an I / O panel that can be rotated in three different orientations on either side. Behind the motherboard compartment there is 28 mm space for neat cable management.
  • SUPPORTS STANDARD ATX - When accommodating a standard ATX motherboard, the power supply unit is mounted in a height-adjustable bracket at the top of the housing. With mini-ITX builds, the power supply unit can be placed in the standard position from bottom to back for better ventilation of the front panel.

Current offers in the area "Atx Mini Tower"

You want the best products in the range Atx Mini Tower buy? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the "Atx Mini Tower" category.

Related Articles