Contents
Recommended products in the "Argb fans" section
We have products in the range "Argb fan" compared with each other and put together recommendations for you. Here you will find the top 15 in the “Argb fans” section.
Argb fans – the most important things at a glance
Argb fans are components used in computers to dissipate heat and keep the system cool while running RGB-Lighting (Red Green Blue) provides an eye-catching look. The integrated LEDs can glow in any color and even produce strobe, wave or similar effects, making them particularly attractive for PC gamers and enthusiasts. The similarities between different Argb fans lie in their basic function and appearance, but there are differences in their performance, noise development and control. High-quality fans offer a high Performance with low noise development at the same time and can often be controlled via software, while cheaper models may offer less performance or be louder. Some models can also be synchronized directly with the motherboard to achieve a harmonious lighting result. Therefore, before making a purchase, be sure to check the exact specifications, compatibility with your hardware, and customer reviews to find the ideal Argb fan for your needs.
The bestsellers in the "Argb fans" category
A list of the best sellers under the category "Argb fan" you can find here. Here you can find out which products other users have bought particularly often.
- 【Simple 3 in 1 Kit】3*120mm integrated design, say goodbye to complicated installation steps, reduce fan cable management troubles, easy to use and save money. The PC fan offers you a better gaming experience while keeping the computer case and CPU well cooled.
- 【PWM Control】Advanced PWM function, the 120mm RGB case fan automatically adjusts the wind speed according to the temperature transmitted from the motherboard to ensure efficient ventilation and ensure the highest performance when needed; when the motherboard is in low temperature, the wind speed of the PWM fans will also be weakened. This PC ARGB fans is eco-friendly and energy-efficient, offering you a longer-lasting cooling solution.
- 【ARGB Lighting】 The Asiahorse 3*120mm ARGB fan features 56 individually controlled addressable ARGB LEDs. A variety of lighting effects can be customized through the motherboard in full color, synchronized with the motherboard to meet your aesthetic needs. The PC fans with ARGB are compatible with most motherboards Aura Mystic Light and Polychome Sync with addressable RGB capability.
- 【Minimized Noise】Three 120mm PWM CPU fans, simple and quiet. Silent PC fan is equipped with sound-absorbing rubber pads to reduce fan vibration frequency and increase fan stability, minimizing PC cooling and maximizing airflow. Maximum Airflow: 66,5 CFM, Noise Level: 16 ~ 34,3 dB(A).
- 【Compatibility】The 360mm LED fan has good compatibility, not only can be used in computer cases, but also compatible with CPU liquid cooler, providing powerful heat dissipation protection for the case and CPU. Don't get stuck playing or programming with this simple PWM Computer Case Fans.
- Best-in-class airflow and low noise levels.
- The advanced dynamic plain bearing allows for a service life of up to 250.000 hours.
- PWM control: An extremely wide speed range enables optimal cooling for all types of workloads.
- Anti-vibration pads reduce fan noise by dampening rattle and vibration.
- A double-layer LED array produces high color saturation and more lighting effects than traditional RGB fans.
- An included ARGB hub connects up to four fans and offers integrated lighting control and Aura Sync support.
- An included ARGB hub connects up to four fans and offers integrated lighting control and Aura Sync support.
- Best-in-class airflow and low noise levels
- The advanced dynamic plain bearing allows for a service life of up to 250.000 hours
- PWM control: An extremely wide speed range enables optimal cooling for all types of workloads
- Anti-vibration pads reduce fan noise by dampening rattle and vibration
- A double-layer LED array produces high color saturation and more lighting effects than traditional RGB fans
- An included ARGB hub connects up to four fans and offers integrated lighting control and Aura Sync support
- Available in black and white finishes to suit a variety of PC configurations
- DIGITAL A-RGB: The 12 A-RGB LEDs placed along the fan hub and the transparent rotor with its closed design ensure even and rich lighting
- EASY TO COMBINE: Both the fan and the A-RGB cable have an integrated Y-splitter, making it even easier to retrofit and control additional fans
- OPTIMIZED FOR STATIC PRESSURE: Due to the high static pressure, the fan guarantees efficient cooling even with increased air resistance. Suitable for use on heat sinks & radiators
- 200-2000 RPM (0 RPM <5%): Thanks to the 4-pin connector, the fan speed can be controlled via PWM PST. This reduces the noise development to a minimum and at the same time guarantees maximum cooling performance
- SPECS: Number: 3 fans, Fan speed: 200-2000 rpm (0 rpm <5%), Airflow: 48,8 cfm | 82,91 m³/h, Static pressure: 1,85 mmH₂O, Noise level: 0,3 sone, Fan connector: 4-pin, LED connector: 3-pin
- SC700 can power numerous 5V ARGB components simultaneously with just one 3-pin 5V ARGB header on the motherboard or controller
- The included SATA interface provides a stable continuous power supply for all your lighting components.
- The magnetic, compact and robust case allows it to be conveniently stowed behind the motherboard tray or positioned elsewhere.
- Supports ASUS Aura, GIGABYTE Fusion, MSI Mystic Light and ASRock Polychrome.
- SC700 is NOT compatible with 12V 4pin RGB devices.
- 1.All-in-ONE wiring harness management design makes the chassis cleaner and CLEANER.
- 2.4-pin PWM fans balance mute and performance to meet different needs,Excellent balance of strong cooling and low noise with PWM Control 600-1800rpm.
- 3.The hydraulic bearing is reduced friction, all four corners are equipped with anti-vibration rubber pads to reduce vibration noise between the fan and the casing for quiet operation.
- 4. Must be compatible with address RGB motherboard (+ 5V, 3Pin) or address RGB controller (+ 5V, 3Pin) (please check your motherboard ARGB motherboard before purchase!).
- 5. Award-winning service combined with an extended two-year warranty means you can use your fans with peace of mind.
- Best-in-class airflow and low noise levels.
- The advanced dynamic plain bearing allows for a service life of up to 250.000 hours
- PWM control: An extremely wide speed range enables optimal cooling for all types of workloads
- Anti-vibration pads reduce fan noise by dampening rattle and vibration
- A double-layer LED array produces high color saturation and more lighting effects than traditional RGB fans
- Thermalright is a Taiwanese brand with over 20 years of development. It has a certain popularity in the domestic and foreign markets and has a decisive impact on the player market. RD product lines include: CPU air-cooled cooler, chassis fan, thermally conductive silicone bearing, conductive silicone grease, CPU fan controller, anti-drop mount support, mounting bracket and other products.
- This fan hub supports installing 8 groups of ARGB fans, which makes wiring easy to manage. Strong pasta installation mode, convenient SATA power line, direct transmission and e security.
- Constructed with strong, double-sided adhesives that attach to the frame with double-sided tape. SATA power line direct transmission, more concise and efficient. Keep stable performance under heavy loads.
- Supports fan speed display and PWM fan control. (Due to the limitation of PWM IC reading principle, it only detects the speed of a single fan plugged into the red interface.)
- Small body, big capacity. Multi-line management and control, keep the cables tidy, support ARGB fan, ARGB light bar, etc., and synchronize the light output of the 5V 3-pin interface equipment. (Note: The 4-pin RGB interface device is not supported! Do not use! Please refer to the arrow on the ARGB connector and insert it toward 5V.
- A-RGB FOR FULL COLOR CONTROL: The 12 A-RGB LEDs can be controlled independently. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers; A-RGB controller incl.
- SIMPLE EXPANSION THANKS TO CONNECTOR BLOCK: The fan has an input and output to forward light and fan signals. The connector block allows this without visible cables
- OPTIMIZED FOR STATIC PRESSURE: When developing the BioniX P120 A-RGB, particular emphasis was placed on focused airflow and high static pressure of 2,1 mmH₂O for efficient cooling
- 400 TO 2300 RPM: The wide speed range and PWM technology allows the fan speed to be controlled synchronously with all other fans - for maximum cooling performance
- TECHNICAL DATA: 3 pieces, including controller, fan speed: 400-2300 rpm, airflow: 48 cfm | 81,55 m³/h, noise level: 0,45 sone, static pressure: 2,0 mmH₂O, 2x 8-pin A-RGB fan connector
- The fan hub can support up to 8 fans, including a total of 8 4-pin PWM connectors and 8 ARGB connectors for ARGB fans or ARGB devices.
- The fan speed can be adjusted through the PWM signal from the motherboard, only the speed of "Fan 1" can be read by the system. The speed control function is not available for 3-pin fans, the connected 3-pin fans run at maximum speed.
- Support 12V RGB/ 5V ARGB motherboard synchronization, by toggling a small switch to synchronize two lighting systems, compatible with AURA, RGB Fusion, Mystic Light, Polychrome. No built-in color modes, sync cable needs to connect to motherboard header.
- Up to 8 ARGB (3-pin) connectors to connect additional devices to build your own lighting system, with support for up to 200 LEDs.
- High quality PCB, very durable, with Velcro to easily fix the hub in the case, SATA power supply keeps the performance stable even under full load.
- 【ARGB PWM Hub】This ARGB hub direct SATA power input, only compatible with 3-pin 5V addressable RGB headers or controllers(Note: do not connect to 12V RGB components).
- 【Multiport Expansion】This RGB hub with fan controller can control up to 8 case fans and 10 Argb lighting channels, turning your case into a smart case and optimizing the cooling capacity in the extended case for a better gaming experience.
- 【Wireless Remote Control】Wireless remote control switch can freely switch between host mode and remote control mode, and easily adjust fan speed (S/M/H)/lighting effect/brightness/LED speed with one button without opening the case.
- 【Widely Compatible】The back is equipped with magnetic mounts to easily fix the hub in the case. Compatible motherboard software includes US Aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and more.
- 【Package List】1 * ARGB HUB , 1 * Wireless Remote Controller, 1 * SATA Power Cable, 1 * ARGB SYNC Cable, 1 * Temperature Signal Cable.
- DIGITAL A-RGB: The 12 A-RGB LEDs placed along the fan hub and the transparent rotor with its closed design ensure even and rich lighting
- EASY TO COMBINE: Both the fan and the A-RGB cable have an integrated Y-splitter, making it even easier to retrofit and control additional fans
- OPTIMIZED FOR STATIC PRESSURE: Due to the high static pressure, the fan guarantees efficient cooling even with increased air resistance. Suitable for use on heat sinks & radiators
- 200-2000 RPM (0 RPM <5%): Thanks to the 4-pin connector, the fan speed can be controlled via PWM PST. This reduces the noise development to a minimum and at the same time guarantees maximum cooling performance
- SPECIFICATIONS: Fan speed: 200-2000 rpm (0 rpm <5%), airflow: 48,8 cfm | 82,91 m³/h, static pressure: 1,85 mmH₂O, noise level: 0,3 sone, fan connection: 4-pin, LED connection: 3-pin
- Best-in-class airflow and low noise levels
- The advanced dynamic plain bearing allows for a service life of up to 250.000 hours
- PWM control: An extremely wide speed range enables optimal cooling for all types of workloads
- Anti-vibration pads reduce fan noise by dampening rattle and vibration
- A double-layer LED array produces high color saturation and more lighting effects than traditional RGB fans
- Amazing lighting effects-Tri-aperture inside and outside glowing light effect, give you an impact visual light effect.
- With the EZDIY-FAB Fan Hub X and 21-key remote control, you can adjust LED lighting effects, colors, brightness and fan speeds in real time. Note: The maximum current is 5A; the HUB-X only supports connecting 6 fans, exceeding this number may damage the hub.
- Sync RGB lighting via motherboard: Support M/B 3-pin RGB headers (5V, Di, -, G), compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB
- Self-lubricating bearings and anti-friction substances reduce operating noise and improve thermal efficiency
- Equipped with 8 anti-vibration rubber pads to effectively prevent vibration during operation, greatly reduce noise and improve efficiency.
- Poly - Voyager Focus 2 Office USB-A (Plantronics) - Bluetooth Dual-Ear (Stereo) Headset with Boom Mic - USB-A PC/Mac/Desk Phone Compatible - Active Noise Canceling - Works with Teams, Zoom & more
- ✔️Powerful PMW fan with 500-2000 rpm
- ✔️Connectivity via magnetic daisy chain for optimized cable management
- ✔️Particularly quiet thanks to seven fan blades
- ✔️9 addressable LED per fan
- ✔️Controlled via the 5V ARGB header on the motherboard
- Amazing lighting effects-Tri-aperture inside and outside glowing light effect, give you an impact visual light effect.
- With 5V ARGB control, 16,8 million color changes can be achieved. Individual exclusive colors can be set through the motherboard software controller, or the RESET button control can be selected to connect, and flexible and changeable lighting effects such as rainbow, flashing, monochrome, breathing can be selected US, ASROCK Gigabyte and MSI to customize the light effect
- Equipped with 8 anti-vibration rubber pads to effectively prevent vibration during operation, greatly reduce noise and improve efficiency.
- Self-lubricating bearings and anti-friction substances reduce operating noise and improve thermal efficiency
- PWM speed control - supports automatic speed control at 400-1600RPM
- Pure white cooler, fan and cable to achieve the ultimate all-white system build of your dream
- Integrated addressable RGB lighting for water block and fan
- Rubber pads on fan for less vibration and noise
- Featuring an addressable RGB controller with 10 light modes and the ability to adjust brightness and color changing speed.
- Compatible with Intel Socket LGA775/115X/1200/1366/2011/2066 and AMD Socket AM2/AM3/AM4/FM1/FM2
This is what Stiftung Warentest says about products in the "Argb fan" area
Stiftung Warentest examines, compares and tests the best products for consumers. Many of the tests by Stiftung Warentest help in deciding which product to buy. We do not currently know whether there is a test winner from Stiftung Warentest for this product that is recommended for purchase.
Our comparison winner in the "Argb fan" area
Current offers in the area "Argb fans"
You want the best products in the range "Argb fan" buy? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the "Argb fans" category.