1. Guides
  2. »
  3. product guide
  4. »
  5. Gadgets
  6. »
  7. radio receiver
  8. »
  9. radio modules
  10. »
  11. The 16 best 433 MHz wireless modules

The 16 best 433 MHz wireless modules

The 16 best 433 MHz wireless modules

Are you looking for the best 433 MHz wireless modules, but unsure how to make the best choice from the large number of different products? Since the selection of 433 MHz radio modules is large and to give you a better overview of the different products to make your purchase decision easier, we have taken a closer look at different 433 MHz radio modules and comparing individual products.

We have many product recommendations for different 433 MHz radio modules, so that you can find what you are looking for and the perfect product. We want to make sure that you are satisfied with your product and that you enjoy it. So you can choose the product that best suits you and your ideas and wishes.

Here you will find different products related to the topic 433 MHz radio modules.

Recommended 433 MHz radio modules

We have compared different 433 MHz wireless modules and put together our product recommendations for you at a glance. Here you will find the top 16 of the best 433 MHz radio modules - have a look now.

The bestsellers among the 433 MHz radio modules

You can find a list of the best-selling and current bestsellers in the 433 MHz wireless modules category here. This list is the best way to find out which products other users have bought most often. There is guaranteed to be a product here for you.

Bestseller no. 1
kwmobile 3X 433 MHz Transmitter Receiver Radio Module for Arduino and Raspberry Pi - Wireless Transmitter Module
  • VARIABLE USE: The kwmobile 433 MHz radio module is ideal for many types of wireless remote control devices. It can also be used with an external antenna (not included).
  • APPLICATION EXAMPLES: The module can be used in many different ways. For example with radio-controlled sockets, alarm systems, lights and much more. Let your creativity take over your mind and body.
  • NOTE: To increase the reception range, you should solder/plug a copper wire to the XY-FST at the ANT contact point.
  • THAT FITS: Compatible with the Raspberry Pi and Aduino devices.
  • WE ARE ALWAYS THERE FOR YOU: You can also benefit from the help and care of our customer service when you buy a kwmobile product.
Bestseller no. 2
WayinTop 3 Set 433MHz Radio Transmitter and Receiver Module + 433MHz Antenna Helical Spiral Spring Remote Control, Super Regeneration Wireless Transmitter Module Burglar Burglar Alarm
  • 【How to Use】The VCC voltage must match the working voltage of the module and keep in good power filtering.
  • 【Perfect Kit】This kit includes 3 pairs of transmitter and receiver modules and 3 pairs of antenna helical spiral spring remote control. And the frequency is 433MHz. It is very popular for remote control system such as remote control roller shutter door, smart car, smart home, etc.
  • 【Easy to use】Great influence on the reception of the antenna module, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor. The length of the antenna 433M is about 17cm.
  • 【Wireless Transmitter Modules】Enable your to wirelessly communicate with radio frequency controlled devices that operate on the same frequency (433MHz in this case).
  • 【Warm Tips】The antenna position also affected the reception of the module, the installation, the antenna as directly as possible from the shield, the high pressure and the source of interference. The frequency used for receiving, decoding and oscillation resistance should match with the transmitter.
Bestseller no. 3
ALAMSCN 5 Set 433MHz RF Receiver and Transmitter Module + RF 433MHz Spring Antenna Kit Compatible with Arduino
  • RX470-4 superheterodyne radio receiver module receives UHF ASK demodulators supporting ASK and OOK modulation. The receiver module has high sensitivity (-108dBm)
  • Low-power performance, along with a high dynamic range (greater than 60dB). The module uses a highly integrated chip, built-in front-end low-noise amplifier, mixer, filter, frequency synthesizer circuit, etc., which can maximize signal optimization.
  • The transmitter module integrates an analog PLL circuit and an ASK modulation circuit with a high degree of integration, etc., and can be applied with short-range wireless communication.
  • Good local oscillator radiation suppression, multiple receiver modules to work (that is, more than a single income) and will not interfere with each other when used together, without affecting the reception distance.
  • Widely used for receiver modules, remote control rolling gates, MP3 remote control, LED remote control, audio remote control, smart car, smart home, etc.
Bestseller no. 4
QIACHIP Wireless rx480e 433 MHz Radio Module RF Receiver Transmitter For Arduino Raspberry pi 3 Sets 4 Channel Output Link Kit with 1527 Learning Code for Remote Control
  • 1.433MHz wireless remote control switching module, can be controlled within 50 meters in open area. Working voltage: DC3.3~5V, the module has a code learning function, without manual coding.
  • 2. Wide range of applications: suitable for receiving modules, motorcycles, car anti-theft products, home security products, electric doors, remote control sockets, remote control LEDs, garage door remote controls, remote control door openers, remote control curtains, alarm hosts, Remote control MP3 and so on.
  • 3. Mini design: the small receiver is easy to hide and keep the interior tidy and beautiful, such as awnings, control boxes.
  • 4. Various modes: short-term mode/toggle/locked functions can be converted at will, no need for bridging, long-term stability.
  • 5. Reliable quality: -40 to 85 °C even in harsh ambient temperatures. Complimentary antenna, receiver and transmitter set can be used in a more flexible combination
Bestseller no. 5
433MHz transmitter and receiver module + PDF instructions for Arduino, FS1000A with example code
  • For example, send sensor data or commands wirelessly from one microcontroller to another. Simple broadcast applications are also possible: a transmitter delivers data to several receivers at the same time.
  • Easy setup and quick start to programming through example application. In the illustrated instructions we will show you how to operate the transmitter and receiver on two Arduino boards.
  • The wide operating voltage range from 3V to 12V makes the modules ideal for most microcontroller boards and single-board computers, such as Arduino and Raspberry Pi.
  • Ranges of at least 20m are possible without external antennas. Under ideal conditions and the use of external antennas, ranges of up to 200m are possible.
  • The scope of delivery includes an XY-FST transmitter and an XY-MK-5V receiver module. You will receive the instructions as a PDF by email after your order has been dispatched.
Bestseller no. 6
dstfuy switch with remote control, 984FT long distance, DC 12V/24V/48V/72V/40A relay wireless switch, remote control relay for theft warning systems, lighting, roller shutters, gate barriers.
  • HIGH POWER LOAD: The relay uses a 40A relay, which can load high-power electrical devices to ensure long-term stability control. (Note: maximum load: 30A)
  • STRONG SIGNAL: Using RF technology, this remote controlled lighting switch can pass through walls, floors and doors and control the receiver from any location at a reliable distance. The maximum range is up to 984 feet without any obstacle.
  • EASY TO CONTROL: The learning code offers high security due to its low repetition rate and re-learning mode. He can erase the old code and relearn a new code. There is a toggle button on the relay, you can always control it too.
  • MORE FLEXIBILITY: Stable and reliable performance, high reception sensitivity: 114 dBm, with two remote controls (with battery), more flexible use.
  • WIDE APPLICATION: This remote control switch is used in industrial control and security fields such as light, motor, remote control, wireless security alarm, wireless door alarm, wireless controller, etc.)
Bestseller no. 7
Radio roller shutter control retrofit set, radio switch for roller shutters, blinds, awnings, consisting of RF remote control + receiver module, range up to 100m
  • 【Save work and money】--- The roller shutter control retrofit set allows you to quickly and easily implement cost-effective radio control for your roller shutter drive, whether as a retrofit or for a new installation. With this set it is possible to upgrade roller shutters and awnings so that they can be conveniently operated using a remote control.
  • 【Easy to install】--- The remote control is very easy to use and easy to learn. Remote control already taught into the receiver at the factory. The receiver (with dimensions of 5,2×4,5×2,5 cm) fits into any standard flush-mounted box. Receiver with power and your switch and motor connected, then off you go with the remote control.
  • 【100M Range】--- Strong RF sign works through walls and doors without interference; Up to 100 meters range in open spaces; it works properly without line of sight.
  • 【Range of applications】--- Radio roller shutter switch retrofit set for easy switching and control of roller shutter motors for roller shutters, blinds, awnings and sun protection. Thanks to the remote control, roller shutters that are difficult to access can be easily controlled wirelessly from the sofa. Comfortable help for sick and physically impaired people.
  • 【Scope of delivery】--- You will receive 1x radio receiver, 1x remote control, 4 x dowels, 4 x screws and English instructions.
Bestseller no. 8
EBYTE E07-M1101D-SMA CC1101 433MHz rf module transceiver long distance transmission CC1101 433MHz receiver and transmitter
  • Application: home security alarm and keyless remote control; wireless alarm security system; building automation solutions; Industrial grade wireless remote control; health products; Advanced Meter Reading Architecture (AMI); Applications in the automotive industry.
  • The measured communication distance can reach 1km; maximum transmission power of 10 mW, software adjustable in several stages;
  • Supports the worldwide license-free ISM 433 MHz band; supports air date rate of 0,3kbps ~ 500kbps; supports multiple modulation modes (OOK, ASK, GFSK, 2-FSK, 4-FSK and MSK); independent 64-byte RX FIFO and TX FIFO
  • Support 1,8V ~ 3,6V power supply, power supply above 3,3V can guarantee the best performance; Industry standard design, support -40~85℃ for long time working; IPEX and stamp hole optional, good for secondary development and integration;
  • Supports RSSI (received signal strength indicator) and LQI (link quality indicator); it connects to MCU via 4-wire SPI interface and provides two universal digital output pins with adjustable functions.
Bestseller no. 9
DollaTek 3pcs 433 MHz receiver and radio transmitter module super regeneration wireless transmitter module receiver module burglar alarm 433M receiver module burglar alarm for Raspberry pi
  • Unwind the placement of the antenna is also crucial to the performance of the receiver, the antenna when you install, and avoid shilder and high voltage
  • To increase the reception range, you should solder/plug a copper wire to the XY-FST at the ANT contact point.
  • Antenna is very important for working voltage, and the length of the antenna is 17cm
Bestseller no. 10
ICQUANZX CC1101 wireless module SMA antenna wireless transceiver module
  • Operating frequency: (Module: 387-464 MHz)
  • Working voltage: 1.8-3.6V
  • Current maximum working current:
  • Maximum transmission power: 10mW (+10dBm)
Bestseller no. 11
DollaTek 433 MHz Receiver and Radio Transmitter Module Super Regeneration Wireless Transmitter Module Burglar Alarm 433M Receiver Module Burglar Alarm for Arduino Raspberry pi
  • Transfer rate: 4KB/S
  • Operating voltage: 3-12V
  • Starting distance: 20-200 meters (different voltage, different results)
  • Receiver sensitivity: -103DBm; Reception frequency: 433MHZ
  • Note: This is not original Arduino product.It is just a replacement accessory from WINGOEER
Bestseller no. 12
This RC radio remote control switch 433 MHz 5V 12V 24V 30V 1 channel radio control relay receiver with 5 transmitters key fobs potential-free contacts relay controller
  • 【Excellent Design】433MHz RF wireless relay remote control switch. Stable and reliable performance with high reception sensitivity (>97 dBm). High frequency signal transmission. A strong signal can pass through walls, floors, doors, boards, etc. It can be controlled within 50 meters away in open area. You can remotely control any machine connected to the relay receiver via the remote control.
  • 【Easy to Use】Extremely easy to set up and reset. 4 operating modes (Momentary/Toggle/Latched/Delay Mode) can be programmed. You can easily program yourself depending on your needs. The operating mode of the product is adjustable. This element has already been set up in latch mode.
  • 【More Flexibility】This receiver uses a high quality 10A relay, which can be used over 100.000 times. Let this product more durable. There are 3 connectors (normally open pin, common pin, normally closed pin) for the wireless relay. This is a relay with potential-free contacts. Dry contacts. 5V~30V wide range voltage safety receiver. So the voltage of 5V/12V/24V/30V can work well.
  • 【Multiplayer Control】One receiver can store about 20 stations. So you can share the channels with family. And one transmitter can control multiple receivers at the same time. The code of the chip is EV1527 learning code, which represents the secure technology system. The remote control has a long service life. There is a screw connector on the back of the transmitter, and the battery can be replaced after disassembly. The battery is 2 pieces CR2016 (included).
  • 【Wide Application】Products can be used in households, farms, factories, offices, laboratories, supermarkets, etc. You can remotely control any device connected to the relay receiver via the remote control. such as garage door opener system, electric lock, electromagnetic door, lamp, lighting, ventilation device, water pump, signal transmission and DIY remote control switch.
Bestseller no. 13
nanoCUL USB Stick FTDI CC1101 868MHz / 433MHz FW 1.67 Kink Antenna FHEM iobroker CCU / CCU2 /CCU3 CUL 868+ Adapter (AskSin Analyzer XS)
  • with firmware for AskSin Analyzer XS
  • Fix Homematic Duty Cycle problems
  • including USB adapter and SMA antenna
Bestseller no. 14
This RC radio remote control switch 433Mhz 220V 230V 1 channel radio control relay receiver with 5 transmitters key fob potential-free contacts relay controller
  • 【Excellent Design】433MHz RF wireless relay remote control switch. Stable and reliable performance with high reception sensitivity (>97dBm). High frequency signal transmission.Strong signal can pass through walls, floors, doors, boards etc. It can be controlled within 30 meters away in open area. You can remotely control any machine connected to the relay receiver via the remote control.
  • 【Easy to Use】Extremely easy to set up and reset. It is a programmable remote control kit. 4 operating modes (Momentary / Toggle / Latched / Delay mode) can be programmed. You can easily program yourself depending on your needs. The operating mode of the product is adjustable. This item has already been set up in locked mode.
  • 【More Flexibility】This receiver uses a high quality 5A relay, which can be used over 100.000 times. Make this product more durable and stable to use. There are 3 terminals (normally open pin, common pin, normally closed pin) for the wireless relay. This is a potential-free contact relay. Passive output. Dry contacts. 100V ~ 250V wide range voltage receiver. So 220V/240V/250V/100V voltage can work well.
  • 【Multiplayer Control】One receiver can store about 32 stations. This way you can pass on the channels to family/friends. The code of the chip is EV1527 learning code, which represents the secure technology system. The remote control has a long service life. There is a screw connector on the back of the transmitter, and the battery can be replaced after disassembly. The battery is 2 pieces CR2016 (included) or 1 piece CR2032.
  • 【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely control any device connected to the relay receiver via the remote control. such as garage door opener system, electric lock, electromagnetic door, lamp, lighting, ventilation device, water pump, signal transmission and DIY remote control switch.
Bestseller no. 15
DollaTek 2pcs 433 MHz Unity Gain Omni, 5,5 inch antenna with magnetic base and SMA connector impedance 50 ohm - 5DBI
  • Unity Gain 5,5-inch omnidirectional long antenna with 9,8-foot premium coaxial cable and SMA connector
  • Designed with a magnetic base. The antenna can be placed horizontally or vertically on any iron surface. However, the vertical position is recommended for a better signal
  • 433MHz wireless data transmission is widely used in vehicle monitoring, small wireless networks, wireless meter reading, access control systems, paging systems, industrial data acquisition systems, wireless tags, identification and contactless smart cards.
  • Small wireless data terminals, fire protection systems, wireless remote control systems, biosignal detection, hydrometeorological monitoring, robot control, wireless data communication, wireless data communication, digital audio, digital image transmission and other fields.
  • Number per packaging: 2 pieces
Bestseller no. 16
Schartec Mini Universal Radio Receiver Garage Door as a set with 5 x remote control radio receiver 433 MHz for garage door drive
  • Universal mini radio receiver set suitable for all gate drives with button connection/pulse control. Ideal for retrofitting or converting an old or defective radio transmitter on your gate drive. Installed and ready for use in just a few steps. Please make sure that your gate drive has a 12-24 V AC/DC power supply for the radio receiver (most drives have this). Otherwise you would have to create an external power supply for the radio receiver.
  • FUNCTION: very easy to use (only two steps). Rolling code encryption (very secure). 1 channel (1 relay output). Mini design 57*34*20 mm (L*W*H). Long range (up to 50 m/ depending on local conditions). Resistant to radio interference. 2-color LED to check the function of the hand transmitter. External programming button. Incl. 48 cm connection cable. Hand transmitter with option for attaching to a key ring. Other handheld transmitters available separately.
  • Technical data: 1-channel (controlled by one drive)/Frequency: 433.92 MHz/Encryption: rolling code/Memory: up to 500 hand transmitters/Power supply: 12-24 V AC-DC/Operating temperature: -20°C to +60 °C/Range: up to 50 m (depending on the environment)
  • Scope of delivery: 1 piece of universal mini radio receiver, 5 pieces of hand transmitter including batteries, instructions
  • in the usual SCHARTEC quality - you can find additional hand transmitters in our shop
Bestseller no. 17
DollaTek 2pcs 433 MHz Unity Gain Omni, 12 inch antenna with magnetic base and SMA connector impedance 50 ohm - 12DBI
  • Unity Gain omnidirectional 12-inch long antenna with 9,8 feet of premium coaxial cable and SMA connector
  • Designed with a magnetic base. The antenna can be placed horizontally or vertically on any iron surface. However, the vertical position is recommended for a better signal
  • 433MHz wireless data transmission is widely used in vehicle monitoring, small wireless networks, wireless meter reading, access control systems, paging systems, industrial data acquisition systems, wireless tags, identification and contactless smart cards.
  • Small wireless data terminals, fire protection systems, wireless remote control systems, biosignal detection, hydrometeorological monitoring, robot control, wireless data communication, wireless data communication, digital audio, digital image transmission and other fields.
  • Number per packaging: 2 pieces
Bestseller no. 18
433MHz outdoor antenna for garage door receiver gate garage radio signal booster wireless repeater with 2m RG174 cable maximum distance 200 meters
  • It is applicable to all signal amplifying antennas of garage doors and electric gates with a frequency of 433,92 MHz.
  • Comes with 2m RG174 cable and metal wall bracket.
  • Increasing the range of garage door hand transmitters up to 200 meters.
  • Designed for all gate automation control boards or receivers.
  • Outdoor installation.
Bestseller no. 19
SCHARTEC® Universal radio receiver for garage door drive, set of 5 radio receivers 433 MHz with 5 hand transmitters for garage door drive
  • Universal and therefore suitable for every impulse-controlled garage door operator, swing gate operator or sliding gate operator. The set is perfect for equipping old drives with new hand-held transmitters or replacing a defective radio receiver. Very secure radio transmission thanks to rolling code encryption (433,92 MHz).
  • Programming of the hand transmitter done in a few seconds. Easy connection in minutes. Radio receiver can learn up to 400 hand-held transmitters. Additional transmitters can be purchased individually in our shop.
  • Modern design with a rubberized surface - making it more impact-resistant and unbreakable than conventional hand-held transmitters. Pressure-resistant keys with good feedback. The transmit symbol flashes blue when pressed as visual feedback. Can be attached to a bunch of keys.
  • Rolling code (very safe), 2-channel (2 relay outputs), high range (up to 50 m/ depending on local conditions), resistant to radio interference, high-quality housing with a sliding connection cover (no unscrewing necessary), hand-held transmitter with mounting option on the bunch of keys, hand-held transmitter shockproof and unbreakable thanks to the coated surface
  • Scope of delivery: 1 x universal radio receiver, 5 x hand-held transmitters, 5 x batteries, 5 x key fobs, instructions
Bestseller no. 20
This RC 2 channel radio relay remote control switch 433 MHz RF AC 220V 240V 10A relay receiver with 2 transmitters key fob large terminal easy wiring
  • 【Excellent Design】433MHz RF wireless remote control switch. Stable and reliable performance with high reception sensitivity (> - 105 dBm). A strong signal can pass through walls, floors and doors. It can be controlled at a distance of 50 meters without any obstacle. You can remotely control any machine connected to the relay receiver via the remote control.
  • 【Easy to Use】Extremely easy to set up and reset. 3 operating modes (momentary/switching/latch mode) can be selected. You can easily set it up yourself depending on your needs. The operating mode of the product is adjustable. These products are tested and programmed in toggle mode before shipping.
  • 【More Flexibility】This receiver contains 2 10A relays and there are 3 ports (normally open, common, normally closed) for each relay. These 2 relays are independent, so you can remotely control each of them independently. This is a relay with potential-free contacts. Passive output. Dry contacts. Each receiver can store approx. 20 transmitters. And one transmitter can also control multiple receivers.
  • 【Quality Assurance】High quality relay that can be used over 100.000 times. Make this product more durable and stable to use. The blue high power connector can withstand a current of 10A, so this product can have a good effect even if the current is unstable. The receiver is suitable for voltages from 85V to 240V and is more flexible to use. Suitable for 220V 230V 240V 110V.
  • 【Wide Application】Products can be used in households, farms, factories, offices, laboratories, supermarkets, etc. You can remotely control any device connected to the relay receiver via the remote control. such as garage door, electric gate, roller door, expansion door and electric curtain, motor, lamp, lighting, ventilation device, signal transmission and so on.

Current offers for 433 MHz radio modules

Do you want to buy the best 433 MHz wireless module? In this bestseller list you will find new offers every day. Here you will find a large selection of current products for 433 MHz radio modules. Have fun shopping!